An important dip in the sound transmission loss of curved panels occurs at the ring frequency. The relevance of using small-scale resonators to solve this issue is experimentally demonstrated on an aircraft sidewall panel. The effect of varying the spatial distribution of single frequency resonators (including combination with a broadband soundproofing treatment), as well as using multi-frequency resonators with a fixed spatial distribution is studied. Large improvement of the measured sound transmission loss under a diffuse acoustic field excitation is obtained around the ring frequency with limited added mass and very small alteration of the overall sound insulation performance.
1 January 2016 in Acta Acustica united with Acustica
This paper aims at developing an experimental method to characterize the vibroacoustic response of a panel to a diffuse acoustic field (DAF) excitation with a different laboratory setup than those used in standards (i.e., coupled rooms). The proposed methodology is based on a theoretical model of the DAF and on the measurement of the panel's sensitivity functions, which characterize its vibroacoustic response to wall plane waves. These functions can be estimated experimentally using variations of the reciprocity principle, which are described in the present paper. These principles can either be applied for characterizing the structural response by exciting the panel with a normal force at the point of interest or for characterizing the acoustic response (radiated pressure, acoustic intensity) by exciting the panel with a monopole and a dipole source. For both applications, the validity of the proposed approach is numerically and experimentally verified on a test case composed of a baffled simply supported plate. An implementation for estimating the sound transmission loss of the plate is finally proposed. The results are discussed and compared with measurements performed in a coupled anechoic-reverberant room facility following standards.
16 June 2014 in The Journal of the Acoustical Society of America
This letter proposes an experimental method to estimate the absorption coefficient of sound absorbing materials under a synthesized diffuse acoustic field in free-field conditions. Comparisons are made between experiments conducted with this approach, the standard reverberant room method, and numerical simulations using the transfer matrix method. With a simple experimental setup and smaller samples than those required by standards, the results obtained with the proposed approach do not exhibit non-physical trends of the reverberant room method and provide absorption coefficients in good agreement with those obtained by simulations for a laterally infinite material.