Quantitative assessments and dynamic monitoring of indicators based on fine-scale population data are necessary to support the implementation of the United Nations (UN) 2030 Agenda and to comprehensively achieve its 17 Sustainable Development Goals (SDGs). However, most population data are collected by administrative units, and it is difficult to reflect true distribution and uniformity in space. To solve this problem, based on fine building information, a geospatial disaggregation method of population data for supporting SDG assessments is presented in this paper. First, Deqing County in China, which was divided into residential areas and nonresidential areas according to the idea of dasymetric mapping, was selected as the study area. Then, the town administrative areas were taken as control units, building area and number of floors were used as weighting factors to establish the disaggregation model, and population data with a resolution of 30 m in Deqing County in 2016 were obtained. After analyzing the statistical population of 160 villages and the disaggregation results, we found that the global average accuracy was 87.08%. Finally, by using the disaggregation population data, indicators 3.8.1, 4.a.1, and 9.1.1 were selected to conduct an accessibility analysis and a buffer analysis in a quantitative assessment of the SDGs. The results showed that the SDG measurement and assessment results based on the disaggregated population data were more accurate and effective than the results obtained using the traditional method.

Studying driving factors of the urban heat island phenomenon is vital for enhancing urban ecological environments. Urban functional zones (UFZs), key for planning and management, have a substantial impact on the urban thermal environment through their two-dimensional (2D)/three-dimensional (3D) morphology. Despite prior research on land use and landscape patterns, understanding the effects of 2D/3D urban morphology in different UFZs is lacking. This study employs Landsat-8 remote sensing data to retrieve the land surface temperature (LST). A method combining supervised and unsupervised classification is proposed for UFZ mapping, utilizing multi-source geospatial data. Subsequently, parameters defining the 2D/3D urban morphology of UFZs are established. Finally, the Pearson correlation analysis and GeoDetector are used to analyze the driving factors. The results indicate the following: (1) In the Fifth Ring Road area of Beijing, the residential zones exhibit the highest LST, followed by the industrial zones. (2) In 2D urban morphology, the percentage of built-up landscape (built-PLAND) and Shannon’s diversity index (SHDI) are the main factors influencing LST. In 3D urban morphology, building density, the sky view factor (SVF), and the area-weighted mean shape index (shape index) are the main factors influencing LST. Therefore, low-density buildings with simple and dispersed shapes contribute to mitigating LST, while fragmented distributions of trees, grasslands, and water bodies also play important roles in alleviating LST. (3) In the interactive detection results, all UFZs show the highest interaction detection results with the built-PLAND. (4) Spatial variations are observed in the impact of different UFZs on LST. For instance, in the residential zones, industrial zones, green space zones, and public service zones, the SVF is negatively correlated with LST, while in the commercial zones, the SVF exhibits a positive correlation with LST.

The characteristics of a wide variety of scales about objects and complex texture features of high-resolution remote sensing images make deep learning-based change detection methods the mainstream method. However, existing deep learning methods have problems with spatial information loss and insufficient feature representation, resulting in unsatisfactory effects of small objects detection and boundary positioning in high-resolution remote sensing images change detection. To address the problems, a network architecture based on 2-dimensional discrete wavelet transform and adaptive feature weighted fusion is proposed. The proposed network takes Siamese network and Nested U-Net as the backbone; 2-dimensional discrete wavelet transform is used to replace the pooling layer; and the inverse transform is used to replace the upsampling to realize image reconstruction, reduce the loss of spatial information, and fully retain the original image information. In this way, the proposed network can accurately detect changed objects of different scales and reconstruct change maps with clear boundaries. Furthermore, different feature fusion methods of different stages are proposed to fully integrate multi-scale and multi-level features and improve the comprehensive representation ability of features, so as to achieve a more refined change detection effect while reducing pseudo-changes. To verify the effectiveness and advancement of the proposed method, it is compared with seven state-of-the-art methods on two datasets of Lebedev and SenseTime from the three aspects of quantitative analysis, qualitative analysis, and efficiency analysis, and the effectiveness of proposed modules is validated by an ablation study. The results of quantitative analysis and efficiency analysis show that, under the premise of taking into account the operation efficiency, our method can improve the recall while ensuring the detection precision, and realize the improvement of the overall detection performance. Specifically, it shows an average improvement of 37.9% and 12.35% on recall, and 34.76% and 11.88% on F1 with the Lebedev and SenseTime datasets, respectively, compared to other methods. The qualitative analysis shows that our method has better performance on small objects detection and boundary positioning than other methods, and a more refined change map can be obtained.

Ordos City is an important energy supply city for Chinese provinces and cities, providing a secure energy supply for China while also generating corresponding environmental pollution. Examining the spatiotemporal patterns of net primary productivity (NPP) in Ordos City and its driving factors is relevant to the realization of the carbon emission policy in Inner Mongolia. This study was undertaken to analyze NPP and its driving factors in Ordos City from 2000 to 2019 using NPP data, CO₂ spatial grid data, meteorological data and statistical yearbook data accordingly. The NPP in Ordos City increased significantly from 2000 to 2019, mainly showing low values of NPP in the northwest and high values in the southeast. The usable grassland area and annual mean precipitation had a significant positive correlation with NPP, whereas the other factors had a more significant negative correlation. The usable grassland area had the largest influence on NPP, and fixed asset investment had the smallest influence on NPP. The total NPP–anthropogenic factor regression model and the mean NPP–natural factor regression model constructed allow for the prediction of NPP. Anthropogenic carbon emissions, population growth and usable grassland area were the main causes of NPP changes. Planting and protecting green plants and scientific and effective energy extraction plans are measures that enhance the degree of carbon sequestration in Ordos City.

Exploring the influence of vegetation carbon stocks over land-cover change and the relationship between land-cover change and net primary production (NPP) is of great practical importance for achieving China’s carbon neutrality target. Therefore, this paper analyses the spatio-temporal distribution of land-cover change and NPP change in Inner Mongolia from 2000 to 2020 and explores the vegetation carbon stock change caused by land-cover change, the relationship between land cover and NPP, and the relationship between land-cover change and NPP change. The results show that the main land-cover change in Inner Mongolia during 2000–2020 was the conversion from other land-cover types to grassland, with the conversion of bare land to grassland from 2000 to 2010 covering an area of 20,634.87 km². During the period of 2000–2020, the high values of NPP were mainly located in northeastern Inner Mongolia, and the low values were mainly distributed in southwestern Inner Mongolia. The total carbon storage changes in vegetation affected by land-cover change during 2000–2010 and 2010–2020 were 10,736,986.11 t and 3,894,272.41 t. The mean values of NPP for different land covers were, in descending order, forest > cultivated land > wetland > grassland > artificial surfaces > shrubland > water bodies > bare land. Between 2000 and 2010, the change in land-cover type to water bodies was the main cause of the decrease in NPP, and the increase in NPP was mainly due to the conversion of other land-cover types to cultivated land, forest, and grassland. The implementation of appropriate conservation and management measures (e.g., the construction of forest and grass ecological protection), planting, and the protection of high-vegetation carbon storage plants and other means can improve the level of vegetation carbon sequestration and protect the ecological environment of Inner Mongolia.

Assessing Sustainable Development Goal (SDG) indicator 15.3.1, which refers to the proportion of degraded land to total land area, and analysing its status and drivers is essential for the development of policies to promote the early achievement of SDG target 15.3 of Land Degradation Neutrality (LDN). In this study, Northeast China was selected as the study area, and the progress of indicator 15.3.1 was assessed based on the perspective of Net Primary Productivity (NPP) calculated by the CASA model. WorldPop population spatial distribution data were used as a proxy for human activities, combined with climate data to calculate the effects of changes in temperature, precipitation and population spatial distribution on vegetation NPP based on the partial correlation coefficient method and the Geodetector method. The results showed that 92.81% of the areas that passed the test of significance showed an increasing trend in vegetation NPP from 2000 to 2020. The vegetation NPP was affected by a combination of temperature, precipitation and population. The effects of temperature and precipitation on spatial differences in NPP for various vegetation types were significantly greater than those of population, but in high-density population zones, the effects of population on spatial differences in NPP were generally greater than those of temperature and precipitation. Precipitation was the main driver for spatial variation in NPP in deciduous broad-leaved forests, cultivated vegetation and thickets, while temperature was the main driver for spatial variation in NPP in evergreen coniferous forests. Generally, the warming and wetting trend in Northeast China contributed to the accumulation of NPP in cultivated vegetation, thickets, steppes and grasslands. The sensitivity of NPP to temperature and precipitation in deciduous broad-leaved and deciduous coniferous forests varied according to geographical location.