The Internet of Things (IoT) is a huge network consisting of various information-sensing devices combined with the Internet. The IoT aims to connect all things with the network to facilitate identification and management. The increasing number of things, connections, and volume of data is challenging the reliability and sustainability of the IoT. To push forward the development of the IoT, a cell-free IoT system is proposed based on a cell-free wireless communication network. Under the architecture of cell-free IoT, the cell concept for wireless communication in the IoT system has been diluted, and the reliability and robustness of the IoT system can be improved when compared with the cellular IoT system. Moreover, this article considers resource allocation and data transmission of cell-free IoT. An optimization model is designed for resource allocation to ensure quality data transmission. Furthermore, a novel heuristic algorithm is proposed for solving the optimization model. The heuristic algorithm is memetic of two machine learning methods. Extensive simulations are conducted to study the performance of the presented cell-free IoT. Energy efficiency is improved by the proposed algorithm compared with existing algorithms. The results show that cell-free IoT can achieve better reliability and sustainability.
Higher requirements must be put forward about wireless signal transmission in harsh environments. Energy loss mitigation, channel estimation, noise interference reduction demands high quality of service in wireless communication. In the fifth generation wireless communication, massive multiple-input multiple-output (MIMO) networks have been used and play a significant role to fulfill the requirements. Cell-Free massive MIMO networks are recognized as possible solution in the future wireless communication. Spectral efficiency (SE) is a very important index in assessing massive MIMO networks. This article tries to optimize both SE and power control of cell-free massive MIMO networks. Both uplink and downlink transmission are included in the study. The optimization model contains both SE and power control of massive MIMO networks. To tackle the model, a novel ensemble method is developed inspired by ensemble learning. The ensemble method is built up on the neighborhood field optimization method. The goodness of the developed ensemble method is verified by comparing with genetic algorithm, gradient descent method and Newton method. Extensive simulations are performed to study the optimization of SE and power control. Different wireless sensors are taken into consideration to simulate different requirements of massive MIMO networks. The results demonstrate the effectiveness of the proposed method for applying in massive MIMO networks.
Device-to-device (D2D) communications and full-duplex (FD) communications, which can improve the spectrum efficiency (SE) of mobile communications, have received much attention. To further improve the SE, some researchers have begun to integrate FD into D2D communications, which will generate more transmission modes. Since different modes have different advantages and disadvantages, the mode selection problem needs further study. In this paper, we investigate the mode selection problem for FD-enabled two-way D2D communications to improve the SE. Four transmission modes, i.e., FD underlay mode, half-duplex (HD) underlay mode, FD overlay mode and HD overlay mode, are considered. For each mode, we maximize the system SE while fulfilling the minimum rate requirements and maximum transmit power constraints for both cellular and D2D users. For FD underlay mode, the optimization problem can be transformed into a difference of convex functions (D.C.) programming and the concave-convex procedure (CCCP) algorithm can solve the problem efficiently. For HD underlay mode and FD overlay mode, we can use search plus CCCP algorithm to solve the optimization problem. For HD overlay mode, we only need to search for the optimal solution. After obtaining the maximum SE of four modes, we can select the maximum one as the optimal mode. Numerical results are presented to illustrate the effects of the channel gains and self-interference cancellation ability on the maximum SE of four modes and the transmission mode selection.
As two promising candidate techniques for the 5G mobile communication system, device-to-device (D2D) communications and full-duplex communications have drawn significant research interests. Since full-duplex communications are suitable for use in low transmit power scenarios to lower the residual self-interference (SI), while D2D communications work in short distance scenarios which result in low transmit power, it is natural to integrate full-duplex into D2D communications. In this paper, we investigate the power control for full-duplex D2D communications underlaying cellular networks. Specifically, we formulate the power control problem by maximizing the achievable sum-rate of the full-duplex D2D link while fulfilling the minimum rate requirement of the cellular link under the maximum transmit power constraint of the cellular user and D2D users. Two algorithms are proposed to solve the optimization problem. For the first algorithm, we convert the objective function into a concave function based on difference of convex (D. C.) structure and propose an iterative algorithm to solve the optimization problem. For the second algorithm, we consider the received signal-to-interference-plus-noise ratios (SINRs) at the D2D users are high. Based on high-SINR approximation, closed-form optimal solutions are obtained for different boundaries of the feasible region. Numerical results are presented to illustrate the effect of the channel gains and SI cancellation ability on the optimal transmit power and the achievable sum-rate of the full-duplex D2D link.
As a key technology of the 5G communication system, device-to-device (D2D) communications have drawn significant research interests. However, the advantage of D2D communications may be limited when D2D users are far away from each other or the communication environments are harsh. In order to extend the range of D2D communications, a promising way is to use relaying technique to assist the communications. In this paper, we use a two-way amplify-and-forward (AF) relay to assist the underlay D2D communications and investigate the power control problem. Specifically, we formulate the power control problem as the optimization of the performance of the D2D link while fulfilling the quality-of-service (QoS) requirement of the cellular link. Two optimization objectives are considered for the D2D link, i.e., maximization of the minimum SINR at D2D users and maximization of the sum-rate of D2D users. For the first optimization objective, we can compare the possible optimal solutions for the three boundary conditions and obtain the optimal solutions. For the second optimization objective, we can convert the objective function into a concave function based on difference of convex (D. C.) structure, and use an iterative algorithm to solve the optimization problem. The simulation results show that the proposed power control scheme can improve the performance of the D2D link.
Positional modulation (PM) has been introduced recently where a given modulation pattern can only be received at certain desired positions. To achieve it, the multi-path effect is exploited for positional modulation with the aid of metasurface acting as a low-cost flexible reflecting surface. In this paper, sparse antenna array based positional modulation design is proposed for the first time; to reduce the implementation complexity of the metasurface, the number of active units is also minimised for a given PM design requirement. Design examples are provided to show the effectiveness of the proposed design.