Aviation permanent magnet synchronous motors (PMSMs) are particularly susceptible to demagnetization faults due to the thermal sensitivity of permanent magnet materials, compounded by high-altitude conditions where reduced air density significantly limits cooling. In addition, the pursuit of high power density and compact structure in aviation design intensifies local thermal stress, while stringent reliability requirements mean even minor degradation can threaten operational safety. This paper investigates the operating characteristics of aviation PMSMs under demagnetization faults and proposes an effective diagnostic approach. A coupled electromagnetic–thermal finite element model is established to evaluate rated and no-load performance and calculate losses under rated conditions, and its validity for the motor body is confirmed using the RT-LAB semi-physical simulation platform. Subsequently, altitude-dependent ambient air parameters are incorporated to analyze the thermal–magnetic field distribution, highlighting the influence of high-altitude operation. Based on the thermal results, a fault dataset is constructed by selecting typical local demagnetization cases and classifying global faults into levels according to temperature criteria, with features extracted in both time and frequency domains. Finally, an intelligent diagnostic method integrating a deep belief network (DBN) and an extreme learning machine (ELM) is developed. Comparative results demonstrate superior accuracy and robustness over conventional methods, advancing demagnetization fault diagnosis for aviation PMSMs.
Aviation permanent magnet synchronous motors (PMSMs) operate with high power density under high-altitude conditions, where the thermal sensitivity of permanent magnet materials and reduced air density make them prone to demagnetization faults. Even small performance degradation can therefore pose a risk to operational safety, and reliable demagnetization diagnosis is required. This paper analyzes the operating characteristics of an aviation interior PMSM under demagnetization faults and develops a dedicated diagnostic approach. A coupled electromagnetic–thermal finite element model is established to evaluate no-load and rated performance, compute losses under rated conditions, and obtain temperature distributions; the electromagnetic model is further corroborated using an RT-LAB semi-physical real-time simulation of the motor body. Altitude-dependent ambient air properties corresponding to 5000 m are then incorporated to assess the magneto–thermal field distribution and reveal the impact of high-altitude operation on temperature rise and demagnetization risk. Based on the thermal analysis, overall demagnetization faults are classified into several temperature-based levels, and representative local demagnetization cases are constructed; for each fault case, time-domain torque and phase-voltage signals and their frequency-domain components are extracted to form a fault dataset. Building on these features, an intelligent diagnostic method integrating a deep belief network (DBN) and an extreme learning machine (ELM) optimized by an enhanced fireworks algorithm (EnFWA) is proposed. Comparative results show that the proposed DBN–ELM–EnFWA framework achieves a favorable trade-off between diagnostic accuracy and training time compared with several benchmark deep learning models, providing a practical and effective tool for demagnetization fault diagnosis in aviation interior PMSMs.