Thermoplastic polyurethane (TPU) combines elastomeric and thermoplastic properties but suffers from insufficient rigidity and strength for structural applications. Herein, we developed novel carbon fiber-reinforced TPU (CF/TPU) composites filaments and utilize melt extrusion for 3D printing to maintain elasticity, while achieving enhanced stiffness and strength through multi scale-the control of fiber content and optimization of printing parameters, reaching a rigid–elastic balance. A systematic evaluation of CF content (0–25%) and printing parameters revealed optimal performance to be at 220–230 °C and 40 mm/s for ensuring proper flow to wet fibers without polymer degradation. Compared with TPU, 20% CF/TPU exhibited 63.65%, 105.51%, and 93.69% improvements in tensile, compressive, and impact strength, respectively, alongside 70.88% and 72.92% enhancements in compression and impact energy absorption. This work establishes a fundamental framework for developing rigid–elastic hybrid materials with tailored energy absorption capabilities through rational material design and optimized additive manufacturing processes.
This study explored the chloride binding characteristics and mechanisms of sulphoaluminate cement (SAC) by isolating its principal mineral component, anhydrous calcium sulphoaluminate (), as the research object. Chloride ingress was investigated under external penetration and internal incorporation conditions, with gypsum dosage varied at molar ratios of 1:0, 1:1, and 1:2 relative to . Through chloride binding experiments and hydration product analysis performed by XRD and TG, the following findings were obtained: under external chloride exposure, the binding capacity increased with rising solution concentration and immersion time. External chloride binding was attributed to SO42−/Cl− ion exchange in AFm to generate Friedel’s salt and was complemented by physical adsorption of chloride in AH3 gel. Under internal chloride incorporation, binding capacity increased progressively with curing age. Internal chloride binding involved the direct participation of Cl− in hydration reactions to form Friedel’s salt in addition to the chemical reaction of AFm and the physical adsorption of AH3. Gypsum dosage critically regulates the AFm/AFt ratio, which in turn governs chloride binding efficiency under both external and internal chloride scenarios (e.g., after immersion in 1 mol/L NaCl solution, the bound chloride content for /gypsum ratios of 1:0, 1:1, and 1:2 was 50.94, 27.28, and 13.47 mg/g, respectively).