The mutual solubility of epoxy oligomer with polysulfone (PSU) and polyethersulfone (PES) was studied by optical interferometry. Additionally, phase diagrams (PDs) were plotted and their evolution during the curing process was shown. The phase structures of modified hardened systems, as well as their tensile strengths, elastic moduli, and crack resistance, have been studied by scanning electron microscopy and physico-mechanical techniques. The effect of initial components’ mutual solubility on the phase structure and, subsequently, on the physico-mechanical properties of the composite material is shown. Differences in the structure and properties of the cured modified compositions depending on the type of PD (with Upper Critical Solution Temperature (UCST) for PSU and Lower Critical Solution Temperature (LCST) for PES) of the initial components are shown.

An epoxy resin modified with polysulfone (PSU) and active diluent furfuryl glycidyl ether (FGE) was studied. Triethanolaminotitanate (TEAT) and iso-methyltetrahydrophthalic anhydride (iso-MTHPA) were used as curing agents. It is shown that during the curing of initially homogeneous mixtures, heterogeneous structures are formed. The type of these structures depends on the concentration of active diluent and the type of hardener. The physico-mechanical properties of the hybrid matrices are determined by the structure formed. The maximum resistance to a growing crack is provided by structures with a thermoplastic-enriched matrix-interpenetrating structures. The main mechanism for increasing the energy of crack propagation is associated with the implementation of microplasticity of extended phases enriched in polysulfone and their involvement in the fracture process.

The compositions based on bimodal high-density polyethylene (HDPE, copolymer of ethylene with hexene-1) and in mixture with monomodal tercopolymer of ethylene with butene-1/hexene-1 (LLDPE, low-density polyethylene) have been studied. Phase equilibrium, thermodynamic parameters of interdiffusion in a wide range of temperatures and ratios of co-components were identified by refractometry, differential scanning calorimetry, optical laser interferometry, X-ray phase analysis. The phase state diagrams of the HDPE—LLDPE systems were constructed. It has been established that they belong to the class of state diagrams of “solid crystal solutions with unrestricted mixing of components”. The paired parameters of the components interaction and their temperature dependences were calculated. Thermodynamic compatibility of α-olefins in the region of melts and crystallization of one of the components has been shown. The kinetics of formation of interphase boundaries during crystallization of α-olefins has been analyzed. The morphology of crystallized gradient diffusion zones has been analyzed by optical polarization microscopy. The sizes of spherulites in different areas of concentration profiles and values of interdiffusion coefficients were determined.

Currently, there is no quantitative approach for the phase structure of cured thermoplastic systems modified with thermoplastic predicting. To solve this problem, we carried out the first stage of the study on a model polycaprolactone–epoxy oligomer (PCL–DGEBA) system. Using differential scanning calorimetry (DSC), refractometry and optical interferometry, a phase diagram for PCL–DGEBA mixtures was constructed, and the Flory–Huggins interaction parameters of PCL–DGEBA mixtures were calculated. The structure of PCL–DGEBA mixtures with different PCL content was analyzed by optical microscopy. The change in the structure formation mechanism with increasing PCL concentration was shown. The diffusion coefficients are calculated by the Motano–Boltzmann method. The values of the apparent activation energy of the viscous flow PCL and of self-diffusion of DGEBA are determined. The obtained data will be used for the in situ curing kinetics and phase equilibria in the diffusion zone investigations in order to develop a quantitative method for predicting the phase structure of cured systems.

Preparation of hydrophobic coatings is still a challenge for researchers in various fields of science. One of the easiest ways consists of the use of special modifiers. However, usually such modifiers are poorly compatible with organic polymeric matrixes, which leads to segregation of modifiers and deterioration of coating properties. In this work, we have synthesized a number of organosilicon copolymers and studied their compatibility with epoxy matrix and hydrophobic efficiency. It was shown that the increase of phenyl-containing units leads to increase of compatibility but decreases hydrophobic efficiency. Addition of small amounts of such modifiers into commercial epoxy paint material can lead to an increase of contact angle of the final coating from 63 to 87° without deterioration of other physico-mechanical properties. These results open new perspectives in preparation of organosilicon hydrophobic modifiers with directed properties for fields of application such as paints and coating materials.