The performance of vehicle active safety systems relies on accurate vehicle state information. Estimation of vehicle state based on onboard sensors has been popular in research due to technical and cost constraints. Although many experts and scholars have made a lot of research efforts for vehicle state estimation, studies that simultaneously consider the effects of noise uncertainty and model parameter perturbation have rarely been reported. In this paper, a comprehensive scheme using dual Extended H-infinity Kalman Filter (EH∞KF) is proposed to estimate vehicle speed, yaw rate, and sideslip angle. A three-degree-of-freedom vehicle dynamics model is first established. Based on the model, the first EH∞KF estimator is used to identify the mass of the vehicle. Simultaneously, the second EH∞KF estimator uses the result of the first estimator to predict the vehicle speed, yaw rate, and sideslip angle. Finally, simulation tests are carried out to demonstrate the effectiveness of the proposed method. The test results indicate that the proposed method has higher estimation accuracy than the extended Kalman filter.

This paper proposes a predefined time transient coordinated control strategy based on an adaptive nonlinear extended state observer (ANLESO) to address the adaptability challenges of mode transition control in power-split hybrid electric vehicles (PS-HEVs). Firstly, building upon a conventional dynamic coordinated control framework, the influence of varying acceleration conditions and external disturbances on mode transition performance is analyzed. To enhance disturbance estimation under both positive and negative as well as large and small errors, an ANLESO is developed, which not only improves the speed and accuracy of disturbance observation but also guarantees symmetric convergence performance with respect to estimation errors. Subsequently, a predefined time feedback controller is developed based on the theory of predefined time control. Theoretical stability analysis demonstrates that the convergence time of the system is independent of the initial state and can be guaranteed within a predefined time. Finally, the feasibility and superiority of the proposed control strategy are validated through Hardware-in-the-Loop (HIL) testing and vehicle experimentation. The results show that, compared with PID control based on a linear expansion state observer, the proposed strategy reduces the mode transition time by 45.7% and mitigates drivability shock by 59.2%.