This research is dedicated to explore practicable processes for natural bamboo fiber production. The mechanical process, steam explosion, chemical process, enzymatic process, and combined process were investigated to produce prospective natural bamboo fibers. Though none of the processes was solely capable of producing fine and spinnable fibers, combined processes were very effective to produce desired fibers. This article presents methodology and information on some of the successful stepwise processes of natural bamboo fiber production. By maintaining eco-friendly approaches, no more than 1.8% NaOH, 1.8% Na2CO3 or NaHCO3, 10 mL/L H2O2 were applied under suitable conditions in different stages of fiber production. Four enzymes- pectinase, xylanase, pectolase, and laccase were also applied for delignification of fibers. A detailed description of processes and analyses of produced fibers are reported along with their average length and fineness. Length of the fibers was 1.2–21.5 cm with a linear density of 134.10–389.27 μg/cm or dtex.
A comprehensive crystallographic investigation was performed by using X-ray (from cobalt source) diffraction (XRD) technique on different bamboo species, natural bamboo fibers (NBFs), commercial bamboo viscose products, and different conventional fibers. Crystallinity indexes (CIs) were estimated as 61–67% of bamboo plants, 69–73% of NBFs, 35–40% of bamboo viscose, and 77–80% of cotton fibers in this study. Results suggest that CI gradually increased during the delignification process to create NBFs up to a certain point and then decreased with further processes. Knowing this behavior informs decisions of the appropriate chemicals or enzymes for further modification processes and continuing to maintain the expected strength of the fiber. Therefore, delignifying raw bamboo increased the strength of the fibers until the maximum CI was achieved, but further extraction of lignin reduced the strength of the NBF resulting in a higher number of fiber breakage and short fibers. Red Margin was found to have lower CI that hinted at easier NBF extraction. With overall crystallite size of 35–39 Å, four crystalline peaks were detected in all bamboo and NBF specimens as (101), and at 17.0–18.6°, 18.5–19.4°, ∼25.5°, and ∼40.5°, respectively. Moreover, this study provides a list of lattice planes, interplanar spacings, reflection angles, and crystallite dimensions of the four targeted bamboo and NBF materials.
27 August 2020 in The Journal of the Textile Institute
This study was conducted with 12 commercial bamboo viscose, conventional rayon, cotton fibers, 4 bamboo species and 12 natural bamboo fiber (NBF) samples to test antibacterial activity against Staphylococcus aureus and Klebsiella pneumoniae. The accuracy and efficacy of test methods were investigated and modified for antibacterial assessment. While the spectrophotometric method was found to be less effective due to low bacterial reduction, the revised viable plate counting technique was consistent and effective for samples in fabric, fiber or powder form. Results revealed that only one viscose product showed antibacterial activity but the majority of the specimens from bamboo plant species and NBFs showed a quantifiable percentage reduction of bacteria against K. pneumoniae (8–95%) but had more modest results against S. aureus (3–50%). As the quantity of bacteria promoting compounds is lower than bacteria-killing compounds due to processing; NBFs showed higher reductions of bacteria than raw bamboo specimens.
23 January 2008 in Midcontinental Journal of Archaeology