Alternative and sensitive spectrofluorimetric methods for the determination of hydroxyindoles, such as serotonin (5HT) and 5-hydroxyindoleacetic acid (5HIA), were developed on the basis of supramolecular interaction with cyclodextrin (CD) nanocavities (βCD and hydroxypropyl-βCD, HPCD) at different pH values. Both substrates and receptors have acidic protons, therefore the interactions produced in different systems were considered. The effects of neutral CD at pH 2.00 and 6.994, and of anionic CD at pH 13.00 on the specific acid-base species of the compounds at each pH were determined. In all the conditions studied, the fluorescence of the substrates in the presence of CD increased. The association constants (K(A), mol(-1)L) between the substrates and CD were determined (30-300) and interpreted. A zero-crossing first-derivative spectrofluorimetric method with and without HPCD was developed for the simultaneous determination of 5HT and 5HIA. The limits of detection (L(D), ng mL(-1)) for the best conditions were 0.37 for 5HT and 0.50 for 5HIA at pH 2.00 with HPCD. These L(D) proved to be better than others reported. The applicability of the direct and derivative spectrofluorimetric methods to urine samples was demonstrated with good recoveries 92-110% and R.S.D. 1-10%.
Gold core–shell nanoparticles were synthesized based on metallic cores, variable silica shell spacers covered with modified fluorescent silica layers. Ultraluminescent properties were obtained based on metal-enhanced fluorescence (MEF). Different silica spacers were synthesized to optimize the MEF enhancement factor (). An optimal was determined equal to 9.5 for shorter silica spacers (). These nanoparticles were deposed on Escherichia coli bacteria at different concentration levels for Bioimaging generation over their surfaces. The best luminescent nanoparticles were deposed on intermediate and higher bacteria concentrations. In the presence of intermediate bacteria concentrations, the ultraluminescent nanoparticles adsorbed showed an increase of 35% to 45% compared with individual nanoparticles. To modify the surface of individual bacteria, diluted samples of bacteria were used in which a 20% decrease in fluorescence emission was measured. In the presence of higher bacteria concentrations, fewer clear and bright images were obtained. At diluted ultraluminescent nanoparticle concentrations, a decrease in brightness and image detail was observed; and in the absence of nanoparticle deposition, no image was recorded. Accordingly, these ultraluminescent gold core–shell nanoparticles have been shown to be useful as platforms for biodetection and tracking applications.
The functionalization of the nanoparticle’s (NP) surface is one method for tuning their overall properties to fit targeted applications. We developed a nanosensor based on the specific supramolecular interactions between ß-cyclodextrin (ßCD) nanocavities and organic molecules of biological interests using the metal-enhanced fluorescence effect (MEF) as the detection signal. We grafted ßCD, a typical macrocyclic host molecule that interacts specifically with different organic molecules and changes their physical properties (such as their fluorescence emission intensity), on gold NPs. To evaluate this nanosensor and the effect of the metallic core, we worked with a typical organic molecule, Rhodamine B (RhB), that has a strong association constant with ßCD (5700 M − 1) and is well-known to be quenched in the presence of cyclodextrins (CDs). The results show that, by grafting ßCD on gold NPs, it is possible to increase the sensitivity of RhB detection by 70%, 80%, and 294% when compared with solutions in (1) a phosphate buffer, (2) with ßCD, and (3) with Au NPs, respectively. These results show that the use of a supramolecular system attached to a metallic NP can interact specifically with a dye to enhance its fluorescence emission through the MEF effect. Moreover, this type of nanosystem can overcome the quenching of the signal by the matrix, such in the case of RhB with CDs. Eventually, this concept could be extended to other dyes with different quenching effects. For this reason, this type of nanosensor system could be used in the future to protect and enhance the dye emission of fluorophores in different biological media.
In this research work, different chemical modifications were applied to gold nanoparticles and their use in enhanced non-classical light emitters based on metal-enhanced fluorescence (MEF) was evaluated. In order to achieve this, gold core–shell nanoparticles with silica shells were modified via multilayered addition and the incorporation of a covalently linked laser dye to develop MEF. Their inter-nanoparticle interactions were evaluated by using additional silica shell multilayers and modified cyclodextrin macrocycles. In this manner, the sizes and chemical surface interactions on the multilayered nanoarchitectures were varied. These optical active nanoplatforms led to the development of different nanoassembly sizes and luminescence behaviors. Therefore, the interactions and nanoassembly properties were evaluated by using various spectroscopic and nanoimaging techniques. Highly dispersible gold core–shell nanoparticles with diameters of 50–60 nm showed improved colloidal dispersion that led to single ultraluminescent gold core–shell nanoparticles with MEF. Then, the addition of variable silica lengths produced increased interactions and consequent nanoaggregation. However, the silanized nanoparticles were easily dispersible after agitation or sonication. Thus, their sizes were proportional only to the diameter and the van de Waals interaction did not affect their sizes in bulk. Then, the covalent linking of different concentrations of modified cyclodextrins was applied to the chemical surfaces by incorporating additional hydroxyl groups from the glucose monomeric unities of cyclodextrins. In this manner, variable larger-sized and inter-branched grafted gold core–shell silica nanoparticles were generated. The ultraluminescent properties were conserved due to the non-optical activity of the cyclodextrins. However, they generated enhanced ultraluminescence phenomena. Laser fluorescence microscopy nanoimaging showed enhanced resolutions in comparison to non-grafted supramolecular gold core–shell nanoparticles. The differences in their interactions and the sizes of the nanoassemblies were explained by their single nanoparticle diameters and the interacting chemical groups on their nanosurfaces. While the varied luminescence emissions generated were tuned by plasmonics, enhanced plasmonic phenomena and light scattering properties were seen depending on the type of nanoassembly. Thus, optically active and non-optically active materials led to different optical properties in the bright field and enhanced the excited state within the electromagnetic near-field of the gold nanotemplates. In this manner, it was possible to achieve high sensitivity by varying the spacer lengths and optical properties. Therefore, further perspectives regarding the design of nano-tools composed of light for various applications were discussed.
The deposition of silica nanoparticles on Escherichia coli bacteria was investigated. The noncovalent interaction between the silanized surfaces and polar components of the biomembrane resulted in a nanobiostructure. This hybrid architecture showed stable conformation characteristics evaluated with different microscopy techniques, such as bright field confocal microscopy and transmission electron microscopy (TEM). Nanobioarchitectures were detected within colloidal dispersions and in the absence of aqueous media. Nanobiointeractions were related to strong polar and hydrogen bridges’ noncovalent interactions. Thus, well-constituted and defined nanobiostructures were observed by bright field confocal microscopy and TEM after their preparation in optimal conditions. However, to evaluate their stability and internanobiostructure interactions, size distributions within variable periods were determined. Variable nanobioaggregate sizes were recorded according to nanoparticles and bacteria concentrations. From single nanolabeled E. coli with well dispersible properties, low bacteria concentrations were observed. In intermediate and high concentrations, different distributions of nanobiostructures were observed in different periods. It was observed that the incorporation of silica nanoparticles into E. coli increased their dispersibility; however, their modified E. Coli membranes with silanized nanosurfaces augmented their internanobiostructure interactions through time. Here, we discuss the dynamics and nanobio-optics properties of E. coli. Their nanobiostructures could not be considered to be static systems; their interactions are regarded as important factors for dispersibility, stability, and effects against additional chemical agents such as antibiotics.