To improve the dynamic response speed of high-speed solenoid valves in electric fuel injection systems of marine diesel engines, a numerical simulation model of the solenoid valve is described in this paper. The accuracy of the simulation model was verified on the test bed of the solenoid valve. The effect of the punch position and the size of the dynamic response of the solenoid valve were investigated by using the distribution law of the electromagnetic force in the armature. The results of the test showed that armature drilling in the inter-yoke zone can optimize the solenoid closing response time, but it has little impact on the solenoid opening response time. From this rule, two groove schemes were further designed. Through comparison and calculation, it can be concluded that the fan groove scheme is better than the trapezoidal groove scheme, and that the opening and closing response times of the solenoid valve should be targeted in order to multi-target optimize the fan groove geometric parameters and the armature thickness. The results show that after optimization, the weight of the motion part is reduced by 21.6%, the opening response time of the solenoid valve is reduced by 11.1%, and the closing response time is reduced by 30.0%. While reducing the oil film damping of the armature motion, the overall dynamic response characteristics of the solenoid valve are improved.

Journal bearings are prone to failure due to lubrication state degradation under extreme operating conditions. To address the unclear transition mechanism and undefined state boundaries under insufficient lubrication, a coupled tribological model of engine journal bearings was established. Through parameter analysis and dynamic failure mechanism study, the effects of radial clearance, temperature, rotational speed, load, and surface roughness on the lubrication state transition were revealed. The results indicate that radial clearance, oil temperature, rotational speed, applied load and surface roughness are all decisive factors for lubrication transition, and every parameter has its unique critical threshold; once exceeding the limit, the oil film integrity is damaged and the lubrication rapidly shifts from mixed lubrication toward boundary lubrication. After crossing critical thresholds, aggravated asperity contact further triggers continuous temperature rise and viscosity reduction, which may induce closed-loop thermal deterioration and eventually accelerate bearing failure. The research findings provide a theoretical basis for robust design and operational safety monitoring of journal bearings.