45 Pags., 8 Figs., 3 Tabls. The definitive version is available at: http://www.sciencedirect.com/science/journal/00221694The Soil and Water Assessment Tool (SWAT) is a well established, distributed, eco-hydrologic model. However, using the study case of an agricultural intensive irrigated watershed, it was shown that all the model versions are not able to appropriately reproduce the total streamflow in such system when the irrigation source is outside the watershed. The objective of this study was to modify the SWAT2005 version for correctly simulating the main hydrological processes. Crop yield, total streamflow, total suspended sediment (TSS) losses and phosphorus load calibration and validation were performed using field survey information and water quantity and quality data recorded during 2008 and 2009 years in Del Reguero irrigated watershed in Spain. The goodness of the calibration and validation results was assessed using five statistical measures, including the Nash–Sutcliffe efficiency (NSE). Results indicated that the average annual crop yield and actual evapotranspiration estimations were quite satisfactory. On a monthly basis, the values of NSE were 0.90 (calibration) and 0.80 (validation) indicating that the modified model could reproduce accurately the observed streamflow. The TSS losses were also satisfactorily estimated (NSE = 0.72 and 0.52 for the calibration and validation steps). The monthly temporal patterns and all the statistical parameters indicated that the modified SWAT-IRRIG model adequately predicted the total phosphorus (TP) loading. Therefore, the model could be used to assess the impacts of different best management practices on nonpoint phosphorus losses in irrigated systems.This work has been financed by La Caixa bank, the General Community of Alto Aragon Irrigation Districts and the Scientific and Technologic Aula Dei Park Foundation with the valuable collaboration of the laboratory staff of CITA-DGA. We thank the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA) for awarding Ahmed Skhiri a predoctoral fellowship.Peer reviewe
Alfalfa is the main forage legume in crop livestock systems worldwide. There is still a scarcity of perennial crop models for alfalfa simulation. Regrowth and herbage yield depend on reserves, seasonal temperature and daylength. A systematic procedure was followed to develop species and cultivar parameters. CROPGRO‐PFM‐alfalfa is available in the latest DSSAT model version (4.7). Despite alfalfa’s global importance, there is a dearth of crop simulation models available for predicting alfalfa growth and yield with its associated composition. The objectives of this research were to adapt the CSM‐CROPGRO Perennial Forage Model for simulating alfalfa growth and yield and to describe model adaptation for this species. Data from six experimental plots grown under sprinkler irrigation in the Ebro valley (Northeast Spain) were used for model adaptation. Starting with parameters for Bracharia brizantha, the model adaptation was based on values and relationships reported from the literature for cardinal temperatures and dry matter partitioning. A Bayesian optimizer was used to optimize temperature effects on photosynthesis and daylength effects on partitioning and an inverse modeling technique was employed for nitrogen fixation rate and nodule growth. The calibration of alfalfa tissue composition was initiated from soybean composition analogy but was improved with values from alfalfa literature. There was considerable iteration in optimizing parameters for the processes outlined above where comparisons were made to measured data. After adaptation, the Root Mean Square Error and d‐statistic of harvested herbage averaged across 58 harvests (yield range: 990–4617 kg ha−1) were 760 kg ha−1 and 0.75, respectively. In addition, good agreement was observed for Leaf Area Index (LAI) (LAI range: 0.1–6.7) with d‐statistic of 0.71. Simulated belowground mass was within the range of literature values. The results of this study showed that CROPGRO‐PFM‐Alfalfa can be used to simulate alfalfa growth and development. Further testing with more extensive datasets is needed to improve model robustness.