Hemicellulose is a carbohydrate biopolymer second only to cellulose, which is rich and has a broad application prospect. The limitation of high-value utilization of hemicellulose has been a long-standing challenge due to its complex and diversified structure. The extraction and subsequent modification of hemicellulose from lignocellulosic biomass represent a promising pathway toward this goal. Herein, the extraction processes including physical pretreatment, chemical pretreatment, and combined pretreatment for separating hemicellulose from lignocellulosic biomass were introduced, and the advantages and disadvantages of various extraction procedures were also described. The chemical modification of hemicellulose such as etherification, esterification, grafting, and cross-linking modification was reviewed in detail. The separation and modification of hemicellulose in the future are prospected based on the earlier studies.
Convertible cellulose and lignin were simultaneously isolated from wheat straw using a two-stage process via simply varying temperature and H2SO4 concentration. At the first-stage, cellulose was obtained by pretreating wheat straw at lower temperature and acid concentration using an organosolv process. The purity, yield and recovery rate of cellulose reached 86.8 wt%, 55.2 and 92.8% at 150 °C with 1 wt% H2SO4. At the second stage, the residual liquid was further treated at higher temperature and acid concentration, giving 17.4% lignin yield with 86.6% recovery rate and 93.2 wt% purity at 180 °C with 1.5 wt% H2SO4. The conversion of the as-isolated cellulose and lignin into chemicals was further investigated. The total yield of 5-hydroxymethylfurfural and glucose derived from wheat straw cellulose reached 82.5%, and 18.3% yield of monophenolic compounds from lignin were obtained, respectively. These results indicated that the two-stage process was effective for obtaining high-quality cellulose and lignin from wheat straw. Both of them displayed excellent convertible property.
In this study, high-performance modified biochar/alginate composite bead (MCB/ALG) adsorbents were prepared from recycled agricultural waste corncobs by a high-temperature pyrolysis and KOH/FeCl3 activation process. The prepared MCB/ALG beads were tested for the adsorption of methylene blue (MB) dye from wastewater. A variety of analytical methods, such as SEM, BET, FTIR and XRD, were used to investigate the structure and properties of the as-prepared adsorbents. The effects of solution pH, time, initial MB concentration and adsorption temperature on the adsorption performance of MCB/ALG beads were discussed in detail. The results showed that the adsorption equilibrium of MB dye was consistent with the Langmuir isothermal model and the pseudo-second-order kinetic model. The maximum adsorption capacity of MCB/ALG−1 could reach 1373.49 mg/g at 303 K. The thermodynamic studies implied endothermic and spontaneous properties of the adsorption system. This high adsorption performance of MCB/ALG was mainly attributed to pore filling, hydrogen bonding and electrostatic interactions. The regeneration experiments showed that the removal rate of MB could still reach 85% even after five cycles of experiments, indicating that MCB/ALG had good reusability and stability. These results suggested that a win-win strategy of applying agricultural waste to water remediation was feasible.