Lead‐free Cs2AgBiBr6 double perovskite is considered a promising alternative photovoltaic absorber to the widely used lead halide perovskite due to its easy processability, high stability, and reduced toxicity. Herein, for the first time spray processing for the deposition of Cs2AgBiBr6 double perovskite thin films is reported. Microstructural (X‐ray diffraction, scanning electron microscopy) and optoelectronic (absorbance, photoluminescence, photocurrent density versus applied voltage curves, electrochemical impedance spectroscopy) properties of spray‐coated film are compared with the spin‐coated benchmark. Incorporation of the spray‐coated Cs2AgBiBr6 double perovskite thin films in solar cells leads to a 2.3% photoconversion efficiency with high open‐circuit voltage of 1.09 V. This study highlights the suitability of ultrasonic spray deposition for the optimization of Cs2AgBiBr6 solar cells in terms of light absorption properties and charge transfer at the Cs2AgBiBr6/hole transporting layer interface.
The energy efficiency of smart windows can be greatly improved by integrating dual‐band electrochromic materials based on nanostructured doped metal oxides, as these allow for the dynamic and independent control of light and heat supplies in buildings, respectively, related to transmitted visible (VIS) and near‐infrared (NIR) solar radiations. Mixed molybdenum–tungsten oxides MoyW1−yO3−δ “MoWOx” are considered as innovative compounds in this context: in comparison with parent WO3−δ formulations, a remarkable increase of unpaired electrons can be obtained from the formation of a larger amount of both reduced species and oxygen vacancies during the synthetic process of MoWOx materials, with a consequently boosted intensity of light absorption by 850–900 nm wavelengths. Consecutively, spin‐coated films obtained from MoWOx structures, solvothermally synthesized for 1 h from 2/1 Mo/W atomic ratios, are shown to be electrochromically commutable through a noticeable VIS‐darkened and NIR‐transparent warm state, while WO3−δ benchmarks classically evolve between bright (VIS‐ and NIR‐bleached), cool (VIS‐bleached, NIR‐opaque), and dark (VIS‐ and NIR‐opaque) states. All in all, such advanced optical functionalities are of high interest for fine‐tuning the selectivity and improving the efficiency of electrochromic fenestration solutions, further improving their capacity to adapt to different climates, seasons, and user preferences.
Light management is an important area of photovoltaic research, but little is known about it in perovskite solar cells. The present work numerically studies the positive effect of structuring the photo-active layer of perovskite material. This structuration consists of a hybrid absorbing layer made of an uniform part and an opal-like part. A genetic algorithm approach allows us to determine the optimal combination among more than potential combinations. The optimal combination provides an internal quantum efficiency of 98.1%, nearly 2% higher than for an equivalent unstructured photo-active layer. The robustness of the optimum against potential experimental deviations, as well as the angular dependency of the proposed structure, are examined in the present study.
Cs2AgBiBr6 double perovskite compounds are increasingly studied in recent years as promising candidates able to counter polluting, harmful, and oxygen‐/moisture‐sensitive issues intrinsic to traditional lead‐containing solar cells. Exhibiting high optical absorption coefficient, low toxicity, and important structural stability, Cs2AgBiBr6 solar cells still suffer from limited absorption of low‐energy photons, low carrier mobility, and limited carrier lifetimes induced by defect states. Herein, for the first time, a molecular layer of tetracene is introduced within a Cs2AgBiBr6‐based photovoltaic architecture: being incorporated at the interface between the double perovskite photoabsorber and spiro‐OMeTAD hole transport material, tetracene allows for a suitably graded cascade of energy bands within the solar cell architecture, which ultimately improves interfacial charge transfers and reduces charge recombination. The performances in photovoltaic devices are consequently enhanced versus tetracene‐free configurations, with champion values of open‐circuit voltages of 1.1 V (vs. 1.0 V), current densities of 2.5 mA cm−2 (vs. 1.9 mA cm−2), and photoconversion efficiencies of 1.7% (vs. 1.3%) with reduced hysteretic behavior.