We propose and demonstrate a novel and compact optical-fiber temperature sensor with a high sensitivity and high figure of merit (FOM) based on surface plasmon resonance (SPR). The sensor is fabricated by employing a single-mode twin-core fiber (TCF), which is polished as a circular truncated cone and coated with a layer of gold film and a layer of polydimethylsiloxane (PDMS). Owing to the high refractive index sensitivity of SPR sensors and high thermo-optic coefficient of PDMS, the sensor realizes a high temperature sensitivity of $-4.13\mathrm{nm}/°\mathrm{C}$ to $-2.07\mathrm{nm}/°\mathrm{C}$ in the range from 20°C to 70°C, transcending most other types of optical-fiber temperature sensors. Owing to the fundamental mode beam transmitting in the TCF, the sensor realizes a high FOM of up to 0.034/°C, more than twice that of SPR sensors based on multimode fiber. The proposed temperature sensor is meaningful and will have potential applications in many fields, such as biomedical and biomaterial.

We propose and demonstrate a frequency modulated continuous-wave (FMCW) light detection and ranging (LiDAR) system, which employs double-sideband modulation combining with injection-locking to generate triangular linear frequency modulation light source. A fiber laser working as master laser is modulated by a Mach-Zehnder modulator to produce two first-order sidebands with tuning range of 8-14 GHz, one of which is extracted and amplified by a slave distributed feedback laser. A large carrier suppression ratio up to 20 dB is realized. The experiment results show the spatial resolution of the proposed LiDAR is 2.5 cm, equaling to the theoretical value. The velocity measurement is also performed by extracting Doppler shift. Finally, by combining the proposed LiDAR with 2-axis mechanical galvanometer scanner, the 3D imaging with high precision is realized, and the real scene is well restored. The proposed LiDAR system realizes pure linear frequency modulation without complex linearization algorithm or clock sampling circuit, and has advantages of simple structure and high precision.

We propose and demonstrate a whispering gallery mode (WGM) resonance-based temperature sensor, where the microresonator is made of a DCM (2-[2-[4-(dimethylamino)phenyl] ethenyl]-6-methyl-4H-pyran-4-ylidene)-doped oil droplet (a liquid material) immersed in the water solution. The oil droplet is trapped, controlled, and located by a dual-fiber optical tweezers, which prevents the deformation of the liquid droplet. We excite the fluorescence and lasing in the oil droplet and measure the shifts of the resonance wavelength at different temperatures. The results show that the resonance wavelength redshifts when the temperature increases. The testing sensitivity is 0.377 nm/°C in the temperature range 25°C–45°C. The results of the photobleaching testing of the dye indicate that measured errors can be reduced by reducing the measured time. As far as we know, this is the first time a WGM temperature sensor with a liquid state microcavity has been proposed. Compared with the solid microresonator, the utilization of the liquid microresonator improves the thermal sensitivity and provides the possibility of sensing in liquid samples or integrating into the chemical analyzers and microfluidic systems.

We propose and demonstrate a novel optical-fiber micro-displacement sensor based on surface plasmon resonance (SPR) by fabricating a Kretschmann configuration on graded-index multimode fiber (GIMMF). We employ a single-mode fiber to change the radial position of the incident beam as the displacement. In the GIMMF, the angle between the light beam and fiber axis, which is closely related to the resonance angle, is changed by the displacement; thus, the resonance wavelength of the fiber SPR shifts. This micro-displacement fiber sensor has a wide detection range of 0–25 μm, a high sensitivity with maximum up to 10.32 nm/μm, and a nanometer resolution with minimum to 2 nm, which transcends almost all of other optical-fiber micro-displacement sensors. In addition, we also research that increasing the fiber polishing angle or medium refractive index can improve the sensitivity. This micro-displacement sensor will have a great significance in many industrial applications and provide a neoteric, rapid, and accurate optical measurement method in micro-displacement.