Due to the complexity imposed by all the attributes of the fracture network of many naturally fractured reservoirs, it has been observed that fluid flow does not necessarily represent a normal diffusion, i.e., Darcy’s law. Thus, to capture the sub-diffusion process, various tools have been implemented, from fractal geometry to characterize the structure of the porous medium to fractional calculus to include the memory effect in the fluid flow. Considering infinite naturally fractured reservoirs (Type I system of Nelson), a spatial fractional Darcy’s law is proposed, where the spatial derivative is replaced by the Weyl fractional derivative, and the resulting flow model also considers Caputo’s fractional derivative in time. The proposed model maintains its dimensional balance and is solved numerically. The results of analyzing the effect of the spatial fractional Darcy’s law on the pressure drop and its Bourdet derivative are shown, proving that two definitions of fractional derivatives are compatible. Finally, the results of the proposed model are compared with models that consider fractal geometry showing a good agreement. It is shown that modified Darcy’s law, which considers the dependency of the fluid flow path, includes the intrinsic geometry of the porous medium, thus recovering the heterogeneity at the phenomenological level.
In the oil industry, many reservoirs produce from partially penetrated wells, either to postpone the arrival of undesirable fluids or to avoid problems during drilling operations. The majority of these reservoirs are heterogeneous and anisotropic, such as naturally fractured reservoirs. The analysis of pressure-transient tests is a very useful method to dynamically characterize both the heterogeneity and anisotropy existing in the reservoir. In this paper, a new analytical solution for a partially penetrated well based on a fractal approach to capture the distribution and connectivity of the fracture network is presented. This solution represents the complexity of the flow lines better than the traditional Euclidean flow models for single-porosity fractured reservoirs, i.e., for a tight matrix. The proposed solution takes into consideration the variations in fracture density throughout the reservoir, which have a direct influence on the porosity, permeability, and the size distribution of the matrix blocks as a result of the fracturing process. This solution generalizes previous solutions to model the pressure-transient behavior of partially penetrated wells as proposed in the technical literature for the classical Euclidean formulation, which considers a uniform distribution of fractures that are fully connected. Several synthetic cases obtained with the proposed solution are shown to illustrate the influence of different variables, including fractal parameters.
A semi-analytical simulator has been developed to describe single-phase gas flow in hydraulically fractured wells hosted by naturally fractured rock. The governing formulation embeds Streltsova’s unsteady-state matrix-transfer function to fracture directly in a dual-porosity finite difference framework and advances the solution with an implicit–explicit scheme. This strategy preserves the analytical description of transient exchange, while avoiding the convolution integrals and tight time-step controls that burden fully numerical unsteady-state models. Both pseudo steady-state and unsteady-state transfer functions can be invoked with different shape factor and we use the logarithmic spaced, local grid refinement methodology to consider the hydraulic fracturing effects that occur near well at minimal computational cost. The simulator was tested on homogeneous, discretely segmented, and fully heterogeneous synthetic reservoirs under constant rate and constant pressure production. In every case, the unsteady-state option reproduced the characteristic early-time pressure transients and matrix-fracture flow that the classical Warren–Root’s model with the pseudo-transitory transfer function may not capture. Compared with a published hybrid numerical–analytical workflow for same shape factor, the new implementation is faster than twelve times, while presenting good pressure behavior and maintaining numerical precision. Because the transfer function remains analytical, computational effort scales only with fracture count and not with matrix grid density, making the approach well suited to large, heterogeneous unconventional plays as well as geothermal and subsurface storage applications. The tests confirm that the method achieves the desired balance between physical fidelity and computational efficiency, providing a robust tool for transient flow analysis and production-strategy optimization in fractured reservoirs.