The oil–air lubrication method is specifically employed for high or ultra-high-speed spindle rolling bearings. Under high-speed conditions, the air curtain formed inside the bearing cavity obstructs oil delivery, thereby limiting further increases in spindle rotation speed. To enhance oil delivery capability, a guiding-structured nozzle has been developed to concentrate the jet flow and improve penetration through the air curtain. Tests were conducted on an oil–air lubricated bearing test bench to investigate the impact of nozzle structures and oil types on torque and temperature rise. The results demonstrate that compared to conventional nozzles, the guiding-structured nozzle requires smaller optimal amounts of oil supply, indicating its superior ability to deliver oil. Further examination of oil jet patterns and droplet distributions confirms that the guiding-structured nozzle provides a more concentrated jet flow with uniform distribution and smaller droplet sizes in diameter. These characteristics contribute to highly efficient oil delivery. Additionally, synthetic oils reduce droplet size, torque, and temperature rise in mixed lubrication regimes due to their formation of an anti-friction absorption layer on rubbing surfaces.
The present study focuses on investigating the influence of oil and solid body temperatures on elastohydrodynamic lubrication (EHL) film formation. Experimental and numerical simulation methods are employed to examine three heating methods: oil and ball heating, disc heating, and entire system heating. A preliminary comparison between the measured results and numerical simulations confirms the impact of heating methods on film formation while validating the availability of the numerical models. Further numerical analysis reveals that in the case of oil and ball heating, the temperature gradient induced by differences in solid body temperatures plays a more significant role in film formation compared to the conventional thermal-viscosity wedge effect caused by EHL film shear. This effect is further amplified at large sliding–rolling ratios and in steel–steel contacts. The overall film formation is primarily governed by the oil inlet temperature, whereas local film formation characterized by a dimple shape is influenced by both thermal gradient effects and thermal-viscosity wedge effects. This study provides valuable insights for selecting appropriate heating methods in experiments as well as understanding how temperature differences affect film formation in practical engineering.
1 January 2025 in Journal of Mechanical Engineering
The cage shape plays a critical role in controlling lubricant distribution and replenishment and enhancing lubrication performance within rolling bearings. This study investigates the effect of four tailored cage shapes on lubricant migration and frictional characteristics at both Ball-Cage (B-C) and Ball-Disc (B-D) contacts. Utilizing a bearing cage friction and lubrication test rig (BCFL), adapted from an optical elastohydrodynamic lubrication (EHL) apparatus, the variation in grease films and friction forces was examined under varying entrainment speeds, grease properties, and grease quantities. Cage-induced lubricant redistribution on the ball surface, replenishment at the B-D contact, and the formation mechanism of thicker film thickness were recognized. The influence of cage design for four distinct shapes on mechanisms enhancing grease lubrication efficiency and friction reduction was examined. The findings provide critical insights for designing next-generation self-aligning cage structures with improved lubrication performance and reduced friction force.