High-modulus asphalt, with its excellent fatigue resistance and high-temperature resistance, is gradually becoming a preferred material for the development of durable asphalt pavements. However, its poor low-temperature performance has become one of the key bottlenecks restricting its wide application. In recent years, in-depth analysis of the mechanism underlying the changes in the low-temperature performance of high-modulus asphalt has gradually become a research focus in the field of asphalt pavements. Accordingly, this study selected four representative high-modulus asphalts, conducted bending beam rheometer (BBR) tests to obtain their low-temperature creep parameters, and used three viscoelastic constitutive models to investigate their low-temperature constitutive relationships. Grey relational analysis (GRA) was further applied to evaluate the models. The results show that, when evaluating the low-temperature performance of high-modulus asphalt, the elastic and viscous parameters variation laws, for the three-parameter solid (TPS) model and four-parameter solid (FPS) model, are not obvious and have large fluctuations, and the accuracy of the fitting curves is relatively low, while the Burgers model has extremely high fitting accuracy, with small parameter fluctuations and significant regularity. The GRA model reveals that the Burgers model is more suitable than the TPS and FPS models for describing the low-temperature creep behavior of high-modulus asphalt, which further confirms the reliability of using the Burgers model to evaluate the low-temperature performance of high-modulus asphalt.

Steel slag is a major solid waste generated by the steelmaking industry. Its characteristics, including high hardness and large specific surface area, offer the potential to replace traditional mineral fillers in asphalt mixtures. However, the high alkalinity of unmodified steel slag often leads to unbalanced rheological properties and insufficient moisture stability in asphalt mastic. In this study, a modified steel slag filler was prepared using a process involving crushing and screening, water washing for dealkalization, and surface modification with a silane coupling agent. Using limestone powder and hydrated lime as control groups, the modification effects on base asphalt mastic were systematically investigated. Rheological properties were characterized using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR). Interfacial performance was evaluated through pull-off tests and water immersion dispersion tests. Furthermore, mechanisms were elucidated using X-ray Fluorescence (XRF), BET specific surface area analysis, and surface free energy (SFE) tests. The results indicate that the modified steel slag significantly enhances the high-temperature deformation resistance of the asphalt mastic. At 58 °C, the complex modulus reached 7.3 MPa, representing increases of 43.3% compared to limestone powder mastic. At −18 °C, the creep stiffness increased by only 3.0%, suggesting that low-temperature cracking resistance remained fundamentally stable. The water immersion dispersion loss rate was 2.12%, and the attenuation rate of pull-off strength after water immersion was 12.5%, indicating that its resistance to moisture damage is superior to that of limestone powder and comparable to that of hydrated lime. Mechanism analysis reveals that the large specific surface area of the modified steel slag strengthens physical adsorption, while the basic oxides undergo a weak acid–base reaction with the acidic components of the asphalt. Additionally, surface modification improves compatibility. The preparation process for modified steel slag is simple; it can be used as a standalone substitute for traditional mineral fillers, balancing both performance and environmental benefits.

To enhance the overall performance of asphalt pavements and promote the efficient utilization of solid waste resources, this study innovatively incorporates recycled polyethylene (PE) particles and recycled ethylene-vinyl acetate copolymer (EVA) particles, each compounded with waste cooking oil (WCO), to modify base asphalt. Systematic tests were conducted to evaluate the physical and rheological properties of the composite modified asphalt. Additionally, Fourier transform infrared spectroscopy (FTIR) and thin-layer chromatography with flame ionization detection (TLC-FID) were used to analyze the microstructures and internal components of the modified asphalt. The results indicate that the optimal mixing ratio for the WPA is 5% WCO, 5% EVA, and 5% PE. With the incorporation of these modified materials, the asphalt’s high-temperature and low-temperature properties, as well as its rutting and fatigue resistance, are enhanced to some extent. Furthermore, the modification significantly improves the rheological properties of the asphalt across the full temperature range. Additionally, the modified materials lead to changes in the internal composition of the asphalt: the content of lighter components decreases, while the content of heavier components increases. These changes in the internal composition are the primary cause of the observed improvements in the rheological properties of the asphalt.

This study investigates the strength and microstructural evolution of SRX-stabilized aeolian sand–gravel mixtures for flexible base applications in desert roads. CBR, UPS (uniaxial penetration strength), and compressive resilient modulus tests were conducted under varying SRX dosages (0.4–1.0%) and aeolian sand contents (30–50%). The results show that increasing the SRX dosage significantly improves all three indices, with the 0.5% SRX and 30% aeolian sand mixture yielding the CBR (385.89%) and UPS (0.938 MPa) and achieving a compressive resilient modulus that meets the requirements for graded aggregate base layers. XRD FTIR and SEM–EDS analyses reveal that the SRX enhances material structure primarily through physical mechanisms, forming dense films and bonding networks without inducing significant chemical reactions. Extended curing improves structural integrity, while excessive aeolian sand reduces compactness. SRX-stabilized aeolian sand gravel is a viable base and subbase material for desert highways.

The growing volume of construction and demolition waste has made discarded concrete a major source of urban solid waste, placing increasing pressure on land resources and the environment. Recycling waste concrete into recycled aggregate concrete (RAC) offers an effective solution for resource conservation and carbon reduction, aligning with the goals of sustainable development. However, due to the residual mortar, high porosity, and microcracks of recycled aggregates, RAC generally exhibits lower compactness, strength, and durability than conventional concrete, particularly under freeze–thaw conditions where degradation accelerates and service life decreases. To address these challenges, this study investigates the optimization of RAC mix design and its frost resistance performance for pavement base applications. An orthogonal experimental design was employed, with the water-to-binder ratio, recycled aggregate replacement ratio, and air-entraining agent dosage as key variables, while 7-day compressive strength, permeability coefficient, and rebound modulus served as evaluation indices. The influence and interaction of these factors were analyzed to determine an optimal mix meeting both mechanical and durability requirements. Rapid freeze–thaw cycling tests were then conducted to examine the variations in mass loss, relative dynamic modulus, and compressive strength retention, followed by exponential and damage variable modeling to characterize the degradation process. Results show that the water-to-binder ratio primarily governs strength, the replacement ratio affects stiffness and permeability, and the air-entraining agent significantly enhances frost resistance by improving pore structure. The optimized mix retained over 70% of its relative dynamic modulus after 300 freeze–thaw cycles, exhibiting superior durability. This work establishes a systematic framework for multi-factor optimization and durability evaluation of RAC, providing theoretical and practical guidance for its application in cold-region pavement bases.

As the core binder material of asphalt pavement, the rheological properties of asphalt directly determine the service performance and service life of the pavement. Under actual service conditions, asphalt is constantly exposed to a multi-coupling environment involving temperature variation, vehicle load, and ultraviolet aging, which easily leads to irreversible rheological deterioration and induces diseases such as rutting and cracking. Aiming at the insufficient research on the rheological evolution law and microscopic damage mechanism under the coupling of the above three factors, this study took 70# base asphalt as the research object and adopted a combination of macro-performance testing and microstructure characterization. The high- and low-temperature rheological properties, permanent deformation resistance, and fatigue resistance of asphalt under multi-coupling effects were systematically evaluated through three conventional index tests: dynamic shear rheology (DSR), multiple stress creep recovery (MSCR), linear amplitude sweep (LAS) and bending beam rheology (BBR). Combined with gel permeation chromatography (GPC) and thin-layer chromatography with flame ionization detection (TLC–FID), the evolution laws of molecular distribution and chemical components were revealed, and the deterioration mechanism of multi-coupling effects was clarified. The results show that compared with the control group, after 72 h of coupling treatment, the penetration decreases by 32.6%, the softening point increases by 18.3%, and the ductility decreases by 45.8%. The high-temperature complex modulus decreases by 51.2%, the low-temperature creep stiffness increases by 76.4%, and the fatigue life decreases by 58.6% on average. At the microscopic level, obvious molecular polymerization and component weight gain occur in asphalt: the content of macromolecular components rises from 18.7% to 32.1%, asphaltene content increases from 12.3% to 25.8%, and aromatic content decreases from 42.6% to 28.3%. Temperature variation, load, and ultraviolet aging present significant deterioration effects, rather than a simple superposition of single factors. Prolonged aging and increased load aggravate the hardening of asphalt, while extreme temperature variation further weakens the rheological properties through microscopic damage. This study clarifies the internal relationship between the microscopic structure and macroscopic properties of asphalt under multi-coupling effects, improves the theory of anti-coupling damage to asphalt, and provides an important theoretical basis and experimental support for damage-resistant design, material selection, and service life prediction of asphalt pavement.