Green synthesized cellulose nanocrystals (CNCs) was prepared using Neurospora intermedia, characterized, and used to remove Strontium ions (Sr2+) from an aqueous solution with high efficiency. The characterization of CNCs was performed using a UV-Vis Spectrophotometer, Dynamic Light Scattering (DLS), Zeta Potential (ZP), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) mapping, EDX elemental analysis and BET surface analyzer. In this study, Response Surface Methodology (RSM) based on Box-Behnken Design (BBD) was successfully applied for the first time to optimize the dynamic adsorption conditions for the maximum removal of Sr2+ ions from aqueous solutions using CNCs as adsorbent. The effects of parameters, such as initial concentration of Sr2+ (50–500 ppm), adsorbent dosage (0.05–0.2 g/50ml), and contact time (15–120 min.) on removal efficiency were investigated. A mathematical model was studied to predict the removal performance. The significance and adequacy of the model were surveyed using the analysis of variance (ANOVA). The results showed that the second-order polynomial model is suitable for the prediction removal of Sr2+ with regression coefficient (R2 = 97.41%). The highest sorption capacity value of Sr2+ was obtained (281.89 mg/g) at the adsorbent dosage of 0.05 g/50 ml, contact time of 120 min., and the pollutant (Sr2+) concentration of 275 ppm.
19 November 2024 in International Journal of Environmental Science and Technology
The biological synthesis of cellulose nanocrystals (CNCs) involves utilizing cellulose-degrading microorganisms or their hydrolytic enzymes as catalysts for the controlled degradation of cellulose, yielding CNCs. Chemical synthesis of CNCs involves acid hydrolysis conducted for 45 min at 45 °C using sulfuric acid (64%). Neurospora intermedia (Assiut University Mycological Center (AUMC) 14,359), Fusarium verticillioides (AUMC 14360), and Rhizopus oryzae (AUMC 14361) were employed in the preparation of CNCs. Before both chemical and biological treatments, sugarcane bagasse (SCB) was irradiated with doses of 100, 200, and 300 kGy, enhancing the yield of nanocellulose from the cellulosic feedstock. The resultant nanocellulose was initially assessed using UV–Vis spectroscopy, and the characterization was further refined through Dynamic Light Scattering analysis to delineate particle size distribution within the nanoscale and to evaluate stability. CNCs and chemically purified cellulose (CPC) displayed analogous Fourier Transform Infrared Spectroscopy but were markedly different from SCB. X-ray Diffraction patterns revealed a notably higher crystallinity of cellulose in nanocellulose, with larger crystallite dimensions compared to CPC and SCB. Transmission Electron Microscope investigations elucidated the morphology of the synthesized nanoparticles. In summary, the selection of F. verticillioides for nanocellulose production represents a promising and sustainable approach that combines effectiveness, environmental friendliness, and cost-efficiency in the synthesis of this valuable nanomaterial. Graphical abstract