Thanks to advanced semiconductor microfabrication technology, chip-scale integration and miniaturization of lab-on-a-chip components, silicon-based optical biosensors have made significant progress for the purpose of point-of-care diagnosis. In this review, we provide an overview of the state-of-the-art in evanescent field biosensing technologies including interferometer, microcavity, photonic crystal, and Bragg grating waveguide-based sensors. Their sensing mechanisms and sensor performances, as well as real biomarkers for label-free detection, are exhibited and compared. We also review the development of chip-level integration for lab-on-a-chip photonic sensing platforms, which consist of the optical sensing device, flow delivery system, optical input and readout equipment. At last, some advanced system-level complementary metal-oxide semiconductor (CMOS) chip packaging examples are presented, indicating the commercialization potential for the low cost, high yield, portable biosensing platform leveraging CMOS processes.
4 April 2018 in IEEE Journal of Selected Topics in Quantum Electronics
In this paper, a novel silicon photonic waveguide for a high sensitivity label-free sensor is presented. We use silicon-on-insulator subwavelength waveguides that consist of five rows of periodic silicon squares with 60 nm gap distances between each square (multibox structure) to construct microring resonators to achieve higher bulk and surface sensitivities than the resonators using conventional strip waveguides. Due to the high surface contact area and low optical confinement of the proposed multibox waveguides, the sensitivity of the microring resonator can be significantly increased. By exposing the multibox microring resonators to ultrapure water and different concentrations of isopropyl alcohol solution, we show a bulk sensitivity of 579.5 nm/RIU, which is an increase compared to recently published subwavelength grating waveguides and strip waveguides in transverse magnetic polarization microring resonators. Finally, a standard biological sandwich assay is employed to demonstrate the multibox sensor's ability, with an enhanced surface sensitivity of 1900 pm/nm.
20 May 2019 in IEEE Journal of Selected Topics in Quantum Electronics
A successful design, fabrication and test of silicon photonic circuits requires design tools, process design kits (PDKs), foundries for fabrication, and test facilities. This paper describes the complete design flow of photonic circuits using rapid-prototyping multiproject wafer foundry processes available in the SiEPIC program. The focus of this paper is on rapid prototyping based on electron beam lithography as an alternative and complementary to what is available via deep-UV lithography-based foundries. We describe in detail the PDK and the use of open-source and commercial tools for the design of optical filters, sensors, neuromorphic photonic processors, optical switches, and discuss test and packaging approaches for these designs. We demonstrate that a “germanium less” process can be used to build small systems featuring photoconductive detectors, electronics, and phase shifters.
Sub-wavelength grating (SWG) metamaterials have been considered to provide promising solutions in the development of next-generation photonic integrated circuits. In recent years, increasied interest has been paid to silicon photonic planar biosensors based on SWG geometries for performance enhancement. In this work, we demonstrate a highly sensitive label-free phase-shifted Bragg grating (PSBG) sensing configuration, which consists of sub-wavelength block arrays in both propagation and transverse directions. By introducing salt serial dilutions and electrostatic polymers assays, bulk and surface sensitivities of the proposed sensor are characterized, obtaining measured results up to 579.2 nm/RIU and 1914 pm/nm, respectively. Moreover, the proposed multi-box PSBG sensor presents an improved quality factor as high as $\sim$8000, roughly 3-fold of the microring-based counterpart, which further improves the detection limit. At last, by employing a biotin-streptavidin affinity assay, the capability for small molecule monitoring is exemplified with a minimum detectable concentration of biotin down to 2.28 $\times$ 10$^{-8}$ M.
Thanks to advanced semiconductor microfabrication technology, chip-scale integration and miniaturization of lab-on-a-chip components, silicon-based optical biosensors have made significant progress for the purpose of point-of-care diagnosis. In this review, we provide an overview of the state-of-the-art in evanescent field biosensing technologies including interferometer, microcavity, photonic crystal, and Bragg grating waveguide-based sensors. Their sensing mechanisms and sensor performances, as well as real biomarkers for label-free detection, are exhibited and compared. We also review the development of chip-level integration for lab-on-a-chip photonic sensing platforms, which consist of the optical sensing device, flow delivery system, optical input and readout equipment. At last, some advanced system-level CMOS-chip packaging examples are presented, indicating the commercialization potential for the low cost, high yield, portable biosensing platform leveraging CMOS processes.