Time delay signature (TDS) of a semiconductor laser subject to dispersive optical feedback from a chirped fibre Bragg grating (CFBG) is investigated experimentally and numerically. Different from mirror, CFBG provides additional frequency-dependent delay caused by dispersion, and thus induces external-cavity modes with irregular mode separation rather than a fixed separation induced by mirror feedback. Compared with mirror feedback, the CFBG feedback can greatly depress and even eliminate the TDS, although it leads to a similar quasi-period route to chaos with increases of feedback. In experiments, by using a CFBG with dispersion of 2000ps/nm, the TDS is decreased by 90% to about 0.04 compared with mirror feedback. Furthermore, both numerical and experimental results show that the TDS evolution is quite different: the TDS decreases more quickly down to a lower plateau (even background noise level of autocorrelation function) and never rises again. This evolution tendency is also different from that of FBG feedback, of which the TDS first decreases to a minimal value and then increases again as feedback strength increases. In addition, the CFBG feedback has no filtering effects and does not require amplification for feedback light.

We experimentally demonstrate a real-time high-speed physical random bit generator using the time-interleaved sampling of broadband white chaos. The white chaos is generated by optical heterodyning of two external-cavity feedback laser diodes. It has a white-noise-like spectrum with a 3-dB bandwidth of 16.7 GHz and a symmetric amplitude distribution and has no time-delay signatures of the external feedback cavities. An analog-to-digital converter (ADC) chip integrated by two time-interleaved sub-ADCs with a maximum sampling rate of 7 GHz is utilized to discretize the white chaos into parallel binary streams. After real-time interleaving combination and exclusive-OR operation in the field-programmable gate array (FPGA), a 14-Gbps binary stream with verified randomness is achieved.

We experimentally demonstrate high-speed correlated random bit generation in real time using synchronized chaotic lasers commonly driven by a laser with dispersive feedback. The dispersive feedback from a chirped fiber Bragg grating induces frequency-dependent feedback delay and thus no longer causes time-delay signature, and resultantly ensures the signal randomness and security of chaotic laser. Driven by the time-delay signature-free chaotic signal, the two response lasers are routed into chaotic states and establish a synchronization with correlation beyond 0.97 while they maintain a low correlation level with the drive signal. Through quantizing the synchronized laser chaos with a one-bit differential comparator, real-time 2.5-Gb/s correlated random bits with verified randomness are experimentally obtained with a bit error ratio of 0.07. Combining with a robust sampling method, the BER could be further decreased to 1W10-4 corresponding to an effective generation rate of 1.7 Gb/s. Bit error analysis indicates that the bit error ratio between the responses is lower than that between the drive and responses over a wide parameter region due to the synchronization superiority of the responses over the drive.

In this study, we have proposed and numerically demonstrated that the bias current of a semiconductor laser cannot be used as a key for optical chaos communication, using external-cavity lasers. This is because the chaotic carrier has a signature of relaxation oscillation, whose period can be extracted by the first side peak of the carrier’s autocorrelation function. Then, the bias current can be approximately cracked, according to the well-known relationship between the bias current and relaxation period of a solitary laser. Our simulated results have shown that the cracked current eavesdropper could successfully crack an encrypted message, by means of a unidirectional locking injection or a bidirectional coupling. In addition, the cracked bias current was closer to the real value as the bias current increased, meaning that a large bias current brought a big risk to the security.

We propose and numerically demonstrate a method of generating wideband chaos laser without time delay signature by using a circular-side hexagonal resonator (CSHR) microlaser with optical feedback from a chirped fiber Bragg grating (CFBG). The theoretical model of the circular-side hexagonal resonator microlaser with chirped fiber Bragg grating feedback is established according to the Lang-Kobayashi equations. The effects of bias current, feedback strength and CFBG dispersion on the bandwidth of the chaos laser and the feedback time delay signature are investigated. The results show that the CFBG-feedback CSHR microlaser can generate a wideband chaos without feedback time-delay signature under the condition of high bias current with a wideband and flat small-signal modulation response and the bandwidth can reach 14 GHz.

Microwave frequency comb (MFC) optimization for frequency-modulated continuous-wave (FMCW) generation by period-one (P1) dynamics with dual-loop optical feedback are numerically investigated. The linewidth, the side peak suppression (SPS) ratio, and the comb contrast are adopted to quantitatively evaluate the optimization performance, which directly influence the phase stability, spectral purity and repeatability of the MFC. The results show that intensity modulation of the optical injection can generate a sweepable FMCW signal after photodetection via the optical beat effect. When optical feedback loops are introduced, the single-loop configuration can reduce the phase noise of the FMCW signal whereas a dual-loop configuration exploits the Vernier effect to achieve further linewidth reduction and wide tolerance to the feedback strength. Finally, for both the SPS ratio and comb contrast, the dual-loop configuration achieves a higher SPS ratio and maintains high contrast across a wide range of optical feedback loop delays, which outperforms the loop time tolerance of the single-loop configuration.