The most recent developments of Fused Deposition Modelling (FDM) techniques are moving the application of Additive Manufacturing (AM) technologies toward new areas of investigation such as the biomedical, aerospace, and marine engineering in addition to the more consolidated industrial and civil fields. Some specific characteristics are required for the components designed for peculiar applications, such as complex geometries, lightweight, and high strength as well as breathability and aesthetic appearance specifically in the biomedical field. All these design specifications could be potentially satisfied by manufacturing with 3D printing techniques. Moreover, the development of purpose-dedicated filaments can be considered a key factor to successfully meet all the requirements. In this paper, fabrication and applications of five new thermoplastic materials with fillers are described and analyzed. They are organic bio-plastic compounds made of polylactic acid (PLA) and organic by-products. The growing interest in these new composite materials reinforced with organic by-products is due to the reduction of production management costs and their low environmental impact. In this study, the production workflow has been set up and described in detail. The main properties of these new thermoplastic materials have been analyzed with a major emphasis on strength, lightweight, and surface finish. The analysis showed that these materials can be particularly suitable for biomedical applications. Therefore, two different biomedical devices were selected and relative prototypes were manufactured with one of the analyzed thermoplastic materials. The feasibility, benefits, and performance of the thermoplastic material considered for these applications were successfully assessed.

In tissue engineering, biocompatible porous scaffolds that try to mimic the features and function of the bone are of great relevance. In this paper, an effective method for the design of 3D porous scaffolds is applied to the modelling of structures with variable architectures. These structures are of interest since they are more similar to the stochastic configuration of real bone with respect to architectures made of a unit cell replicated in three orthogonal directions, which are usually considered for this kind of applications. This property configures them as, potentially, more suitable to satisfy simultaneously the biological requirements and those relative to the mechanical strength. The procedure implemented is based on the implicit surface modelling method and the use of a triply periodic minimal surface (TPMS), specifically, the Schwarz’s Primitive (P) minimal surface, whose geometry was considered for the development of scaffolds with different configurations. The representative structures modelled were numerically analysed by means of finite element analysis (FEA), considering them made of a biocompatible titanium alloy. The architectures considered were thus assessed in terms of the relationship between the geometrical configuration and the mechanical response to compression loading.

This paper proposes a replicable methodology to enhance the accuracy of the photogrammetric reconstruction of large-scale objects based on the optimization of the procedures for Unmanned Aerial Vehicle (UAV) camera image acquisition. The relationships between the acquisition grid shapes, the acquisition grid geometric parameters (pitches, image rates, camera framing, flight heights), and the 3D photogrammetric surface reconstruction accuracy were studied. Ground Sampling Distance (GSD), the necessary number of photos to assure the desired overlapping, and the surface reconstruction accuracy were related to grid shapes, image rate, and camera framing at different flight heights. The established relationships allow to choose the best combination of grid shapes and acquisition grid geometric parameters to obtain the desired accuracy for the required GSD. This outcome was assessed by means of a case study related to the ancient arched brick Bridge of the Saracens in Adrano (Sicily, Italy). The reconstruction of the three-dimensional surfaces of this structure, obtained by the efficient Structure-From-Motion (SfM) algorithms of the commercial software Pix4Mapper, supported the study by validating it with experimental data. A comparison between the surface reconstruction with different acquisition grids at different flight heights and the measurements obtained with a 3D terrestrial laser and total station-theodolites allowed to evaluate the accuracy in terms of Euclidean distances.

An area of interest in orthopaedics is the development of efficient customized neck orthoses, considered that pathologies which affect the neck area are widespread. Advanced acquisition and modelling approaches combined with Additive Manufacturing (AM) can potentially provide customized orthoses with improved performance and complexity. However, in the design of these devices, besides functional and structural requirements, benefit and comfort of the patient should be a main concern, in particular, at the early stage of design during the acquisition of the body’s part, and while using the printed orthosis. In this paper, a scanning system with three sensors was developed which allows a fast, about 5 s, and accurate acquisition of the neck area with minimum discomfort for the patient. A neck orthosis with a ventilation pattern obtained by Topology Optimization (TO), lightened by about 35%, was also established. In fact, a main role for comfort is played by the ventilation pattern which contributes both to lightness and breathability. Its structural and comfort performance was evaluated in comparison with an orthosis with a ventilation pattern configured by Voronoi cells. Structural assessment was carried out by means of finite element analysis under main loading conditions. An evaluation of neck temperatures in relation to wearing 3D printed prototypes, manufactured with Hemp Bio-Plastic® filament, was finally conducted by means of a thermal imaging camera. TO orthosis prototype showed a better performance regarding thermal comfort, with a maximum increase of neck temperature less than 1 °C, which makes the proposed configuration very promising for user's comfort.

The concept of “surface modeling” generally describes the process of representing a physical or artificial surface by a geometric model, namely a mathematical expression. Among the existing techniques applied for the characterization of a surface, terrain modeling relates to the representation of the natural surface of the Earth. Cartographic terrain or relief models as three-dimensional representations of a part of the Earth's surface convey an immediate and direct impression of a landscape and are much easier to understand than two-dimensional models. This paper addresses a major problem in complex surface modeling and evaluation consisting in the characterization of their topography and comparison among different textures, which can be relevant in different areas of research. A new algorithm is presented that allows calculating the fractal dimension of images of complex surfaces. The method is used to characterize different surfaces and compare their characteristics. The proposed new mathematical method computes the fractal dimension of the 3D space with the average space component of Hurst exponent H, while the estimated fractal dimension is used to evaluate, compare and characterize complex surfaces that are relevant in different areas of research. Various surfaces with both methods were analyzed and the results were compared. The study confirms that with known coordinates of a surface, it is possible to describe its complex structure. The estimated fractal dimension is proved to be an ideal tool for measuring the complexity of the various surfaces considered.