Yanbing Zhao

Prof. Yanbing Zhao


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
XLXue Li
Xue Li
WYWei Yan
Wei Yan
YZYanbing Zhao
Yanbing Zhao
LYLI Yongye
LI Yongye
Yan ZhangYan Zhang
Yan Zhang
YLYun Lang
Yun Lang
Suction embedded plate anchors are widely used in deepwater mooring systems, which can withstand significant vertical loading. During the installation, the mooring chain is tensioned and causes the anchor to rotate, which is known as keying. With a large deformation finite element approach of the coupled Eulerian–Lagrangian method, the chain effects are incorporated into the keying of suction embedded plate anchors. The effectiveness of the proposed method is verified by numerical results and centrifuge tests. The numerical study reveals that the installation angle of the chain has a significant effect on the loss of embedment, especially combined with the effects of load eccentricity and soil strength. The losses of embedment are 0.024~0.273 and 0.217~1.755 anchor width for the installation angles of 15° and 90°, respectively. The ultimate bearing capacity factor decreases with the increasing of load eccentricity and soil strength, because a cavity is formed at the anchor back. Empirical formulae are finally developed for engineers to rapidly estimate the embedment loss and ultimate pullout capacity of suction embedded plate anchors.

10 January 2021 in Water
Verified
Journal Article
Open access
PDF file
Yan ZhangYan Zhang
Yan Zhang
JLJijian Lian
Jijian Lian
SLSonghui Li
Songhui Li
YZYanbing Zhao
Yanbing Zhao
GZGuoxin Zhang
Guoxin Zhang
YLYi Liu
Yi Liu
Ground vibrations induced by large flood discharge from a dam can damage surrounding buildings and impact the quality of life of local residents. If ground vibrations could be predicted during flood discharge, the ground vibration intensity could be mitigated by controlling or tuning the discharge conditions by, for example, changing the flow rate, changing the opening method of the orifice, and changing the upstream or downstream water level, thereby effectively preventing damage. This study proposes a prediction method with a modified frequency response function (FRF) and applies it to the in situ measured data of Xiangjiaba Dam. A multiple averaged power spectrum FRF (MP-FRF) is derived by analyzing four major factors when the FRF is used: noise, system nonlinearity, spectral leakages, and signal latency. The effects of the two types of vibration source as input are quantified. The impact of noise on the predicted amplitude is corrected based on the characteristics of the measured signal. The proposed method involves four steps: signal denoising, MP-FRF estimation, vibration prediction, and noise correction. The results show that when the vibration source and ground vibrations are broadband signals and two or more bands with relative high energies, the frequency distribution of ground vibration can be predicted with MP-FRF by filtering both the input and output. The amplitude prediction loss caused by filtering can be corrected by adding a constructed white noise signal to the prediction result. Compared with using the signal at multiple vibration sources after superimposed as input, using the main source as input improves the accuracy of the predicted frequency distribution. The proposed method can predict the dominant frequency and the frequency bands with relative high energies of the ground vibration downstream of Xiangjiaba Dam. The predicted amplitude error is 9.26%.

13 June 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WWWei Wang
Wei Wang
LZLongfei Zhang
Longfei Zhang
DMDajun Mao
Dajun Mao
旭张旭雄 张
旭雄 张
ZLZeying Li
Zeying Li
YTYu Tian
Yu Tian
Landslides are the most common geological hazards, and chemical reinforcement is an effective method for enhancing the stability of soil slopes. Based on the coupled Eulerian–Lagrangian method, finite element analyses were conducted to develop a simple design approach for soil slope reinforcement using the curing agent. First, the effects of internal friction angle, cohesion, soil unit weight, slope height and angle on the slope stability were systematically quantified through 93 numerical cases. On this basis, an empirical formula was established for the factor of safety (FOS) of soil slope, and a method for determining the failure mode was proposed using a dimensionless parameter and two critical values related to slope angle. Subsequently, the reinforcement performance of the SH curing agent was investigated by varying the reinforcement position and length. The results indicate that the reinforcement of Case I-II-III and Case I-II provide the best performance, and the optimum reinforcement length was determined for different slope conditions. For slope angles ranging from 25° to 65°, the FOS after reinforcement was found to increase by 12.1% to 18.8% compared with that before reinforcement. Based on the FE results, empirical formulae for predicting the FOS of reinforced slope were further developed. Finally, a simple design approach was proposed for soil slope reinforcement with curing agent. The proposed method provides a convenient and effective reference for engineering practice in soil slope reinforcement with curing agents.