In the present study, the use of the rice husk biomass as an alternative biosorbent for treating the estrone, 17 β-estradiol, and estriol hormones in monocomponent and multicomponent systems was investigated. The high-performance liquid chromatography technique (HPLC-UV) was applied in order to quantify the hormones, validating this method according to ANVISA and INMETRO. The biosorbent presented functional groups typical of cellulose, hemicellulose, lignin, and proteins, with an amorphous, fibrous, and porous surface. The best performance was obtained with a neutral pH and at room temperature (25 C). The equilibrium times in batch systems were 60 min for the estrone, and 120 min for 17 βestradiol and estriol. The monocomponent kinetics of adsorption of estrone and estriol were adequately described by the pseudo-first-order model, whereas for the 17 β estradiol both pseudo-first-order and pseudo-second-order models well described the experimental data. For the multicomponent system, the kinetics of adsorption was appropriately represented by the pseudo-first-order model, demonstrating that the number of active sites was the limiting factor of the process. The monocomponent adsorption isotherms were adequately fitted by the Langmuir model, reaching adsorption capacities of 2.698, 1.649, and 0.979 mg g−1 for the estrone, 17 βestradiol, and estriol hormones, respectively. The ternary isotherm models did not represent the experimental data, indicating that there was no competition among the hormones. The reactions presented favourable and spontaneous characteristics. The rice husk biomass showed a great potential as an adsorbent when treating effluents contaminated with hormones.
The herbicide removal of Diuron in a fixed-bed column packed with the Moringa oleifera bark biosorbent was investigated experimentally and through phenomenological mathematical modelling. To understand the physical phenomena involved, the steps of external mass transfer resistance, internal mass transfer resistance and the adsorption phenomenon itself were considered as possible limiting steps in the herbicide mass transfer from the liquid to the solid phase. In the developing process of the internal mass transfer resistance model, two hypotheses were considered: constant mass transfer coefficient and mass transfer coefficient as a function of the herbicide concentration in the biosorbent. The experimental breakthrough curves were obtained for different flow rates and feed concentrations, in order to evaluate the model’s predictive capacity. The mass transfer parameter values of the mathematical models were estimated using the simplex downhill optimization method. The model that considers the resistance a mass transfer internal with parameter Ks variable represented effectively the dynamic behaviour of the herbicide biosorption process in fixed-bed column, in the various evaluated conditions, indicating that this mechanism controls the biosorption process. Thus, the phenomenological mathematical modelling proved to be an analysis important tool, understanding and the herbicide adsorption systems design in a fixed-bed column.