The growth of marine traffic in harbors, and the subsequent increase in vessel and propulsion system sizes, produces three linked problems at the harbor basin area: (i) higher erosion rates damaging docking structures; (ii) sedimentation areas reducing the total depth; (iii) resuspension of contaminated materials deposited at the seabed. The published literature demonstrates that there are no formulations for twin stern propellers to compute the maximum scouring depth. Another important limitation is the fact that the formulations proposed only use one type of maneuvering during the experimental campaign, assuming that vessels are constantly being undocked. Trying to reproduce the real arrival and departure maneuvers, 24 different tests were conducted at an experimental laboratory in a medium-scale water tank using a twin propeller model to estimate the consequences and the maximum scouring depth produced by stern propellers during the backward/docking and forward/undocking scenarios. Results confirm that the combination of backward and forward scenario differs substantially from the experiments performed so far in the literature using only an accumulative forward scenario, yielding deeper scouring holes at the harbor basin area. The results presented in this paper can be used as guidelines to estimate the effects of regular vessels at their particular docking location.

We present a new set of experiments in local scour due to confined twin propeller jets aiming to include propeller driving characteristics to the analysis of the scouring action during in-port manoeuvres. The maximum scour depth is studied as a function of the bed clearance, the wall clearance and the efflux velocity of the jet. Aiming to reproduce more realistic manoeuvres, both forward and backward rotation of the propellers are analysed showing a different behaviour. The obtained results are used to propose two different empirical models, one for each regime of rotation. A new non-dimensional parameter obtained from the Buckingham π analysis, proposed as wall Froude number, is used to find a clear threshold triggering the scouring mechanism. The experimental results show that the distance to the vertical wall is the main contributor to the higher scour depths rather than the propeller speed of rotation or the bed clearance.

The present contribution aims to implement a new methodology to prevent Roll on-Roll off vessels (RO-RO) from causing severe scouring actions. The methodology combines field, experimental, theoretical and numerical tools exchanging information to establish the manoeuvre potential scouring damage. The main contribution is the introduction of a manoeuvre ship simulator to obtain variables that otherwise cannot be obtained in field studies. These variables, all related to ship’s propeller behaviour, are the rotational speed, the pitch ratio and the engine power during the whole manoeuvre. Results show an over-prediction of the theoretical and experimental axial velocity and maximum erosion depth, indicating their clear limitations and the necessity of accurate data to apply the method. The methodology used with the key incorporation of the manoeuvre simulator is revealed to be a very useful tool to study new manoeuvres (including the possibility to work with a single or a couple of tugboats during the docking and undocking manoeuvres) to prevent propeller scouring actions.