Metamaterials are usually designed using biomimetic technology based on natural biological characteristics or topology optimization based on prior knowledge. Although satisfactory results can be achieved to a certain extent, there are still many performance limitations. For overcoming the above limitations, this paper proposes a rapid metamaterials design method based on the generation of random topological patterns. This method realizes the combined big data simulation and structure optimization of structure-electromagnetic properties, which makes up for the shortcomings of traditional design methods. The electromagnetic properties of the proposed metamaterials are verified by experiments. The reflection coefficient of the designed absorbing metamaterial unit is all lower than −15 dB over 12–16 GHz. Compared with the metal floor, the radar cross section (RCS) of the designed metamaterial is reduced by a minimum of 14.5 dB and a maximum of 27.6 dB over the operating band. The performance parameters of metamaterial obtained based on the random topology design method are consistent with the simulation design results, which further verifies the reliability of the algorithm in this paper.
Electromagnetic (EM) metamaterials have a wide range of applications due to their unique properties, but their design is often based on specific topological structures, which come with certain limitations. Designing with stochastic topologies can provide more diverse EM properties. However, this requires experienced designers to search and optimise in a vast design space, which is time-consuming and requires substantial computational resources. In this paper, we employ a deep learning network agent model to replace time-consuming full-wave simulations and quickly establish the mapping relationship between the metamaterial structure and its electromagnetic response. The proposed framework integrates a Convolutional Block Attention Module-enhanced Variational Autoencoder (CBAM-VAE) with a Transformer-based predictor. Incorporating CBAM into the VAE architecture significantly enhances the model’s capacity to extract and reconstruct critical structural features of metamaterials. The Transformer predictor utilises an encoder-only configuration that leverages the sequential data characteristics, enabling accurate prediction of electromagnetic responses from latent variables while significantly enhancing computational efficiency. The dataset is randomly generated based on the filling rate of unit cells, requiring only a small fraction of samples compared to the full design space for training. We employ the trained model for the inverse design of metamaterials, enabling the rapid generation of two cells for 1-bit coding metamaterials. Compared to a similarly sized metallic plate, the designed coding metamaterial radar cross-section (RCS) reduces by over 10 dB from 6 to 18 GHz. Simulation and experimental measurement results validate the reliability of this design approach, providing a novel perspective for the design of EM metamaterials.
2 May 2024 in Journal of Materials Engineering and Performance