A comparison of atomic layer deposited Al2O3 on PVDF-based copolymers in polymer transistors shows a significant improvement in the subthreshold swing for PVDF-HFP devices compared with PVDF-TrFE. Al2O3 passivates the interfacial traps.
Aluminum scandium nitride (Al1−xScxN) is a promising ferroelectric material for non-volatile random-access memory devices and electromechanical sensors. However, adverse effects on polarization from electrical leakage are a significant concern for this material. We observed that the electrical conductivity of Al1−xScxN thin films grown on epitaxial TiN(111) buffered Si(111) follows an Arrhenius-type behavior versus the growth temperature, suggesting that point defect incorporation during growth influences the electronic properties of the film. Photoluminescence intensity shows an inverse correlation with growth temperature, which is consistent with increased non-radiative recombination from point defects. Further characterization using secondary ion mass spectrometry in a focused ion beam/scanning electron microscope shows a correlation between trace Ti concentrations in Al1−xScxN films and the growth temperature, further suggesting that extrinsic dopants or alloying components potentially contribute to the point defect chemistry to influence electrical transport. Investigation of the enthalpy of formation of nitrogen vacancies in Al1−xScxN using density functional theory yields values that are in line with electrical conductivity measurements. Additionally, the dependence of nitrogen-vacancy formation energy on proximity to Sc atoms suggests that variations in the local structure may contribute to the occurrence of point defects, which, in turn, can impact electrical leakage. Furthermore, we have demonstrated ferroelectric behavior through electrical measurements and piezoresponse force microscopy after dc bias poling of films in spite of electrical conductivity spanning several orders of magnitude. Although electrical leakage remains a challenge in Al1−xScxN, the material holds potential due to tunable electrical conductivity as a semiconducting ferroelectric material.
11 February 2025 in Journal of Vacuum Science & Technology B
Aluminum nitride-based ferroelectric thin films show significant promise for neuromorphic computing applications. Deposition by reactive sputtering, the most common approach to synthesizing these materials, leads to significant mosaic disorder and point defects. To combat these challenges, we use a different approach and demonstrate growth of amorphous aluminum oxynitride (AlON) thin films by inductively coupled hydrazine plasma enhanced atomic layer deposition (ALD). Electrical property characterization using positive-up negative-down measurements shows remanent polarization of 1.58 μC cm−2 in AlON films grown at 350 °C in a CMOS-compatible growth process, and piezoresponse force microscopy hysteresis and poling experiments yield behavior consistent with ferroelectricity. Furthermore, sub-5 nm thick devices were able to be switched below 5 V. Structural characterization was performed using x-ray photoelectron spectroscopy depth profiling, spectroscopic ellipsometry, x-ray diffraction, and low-angle x-ray reflectivity measurements. ALD provides an alternative approach to grow ferroelectric aluminum nitride-based films with significant advantages from a device scaling standpoint.
Investigation of aluminum nitride-based ferroelectric thin films for non-volatile memory applications has largely focused on various thin film solid solutions grown by reactive sputtering. The growth process leads to significant DC electrical leakage related to mosaic disorder and point defects in this class of materials; extrinsic alloying elements such as scandium or boron are used to facilitate ferroelectric switching at lower electric fields to limit these deleterious effects. We take a different approach focusing on growth via atomic layer annealing using a nitrogen remote inductively coupled plasma (ICP). We demonstrate ferroelectric behavior in nanocrystalline wurtzite aluminum nitride (AlN) films with neither additional alloying components nor post-process annealing grown using a 350°C CMOS-compatible growth process. The films do not exhibit hard dielectric breakdown even under electric fields in excess of 10 MV cm-1. Electrical property characterization using positive-up-negative-down (PUND) measurements shows remanent polarization (Pr) in excess of 30 µC cm-2. Piezoresponse force microscopy (PFM) DC bias poling experiments yield behavior consistent with ferroelectricity. Structural characterization was performed using Scanning/Transmission Electron Microscopy, X-ray Photoelectron Spectroscopy depth profiling, and spectroscopic ellipsometry. An ALD-based growth approach to ferroelectric aluminum nitride-based films holds significant advantage from a device scaling standpoint and provides an alternative route towards aluminum nitride-based thin films.