The whole world has been affected by the COVID-19 pandemic and oxygen demand is greater than ever, but the supply is expectedly short. People in need of this oxygen are not able to receive it, especially those who cannot afford it. In addition to these issues, the oxygen from production plants is not getting delivered to hospitals on a timely basis due to insufficient availability of tankers and cylinders. It is therefore crucial to enable access of oxygen beds and cylinders to the public by developing economical methods for medical oxygen generation. Conventional methods like oxygen concentrators, the Pressure Swing Adsorption (PSA) Technique and Air Separation Units (ASUs) are either too expensive, energy intensive or feasible only on a small scale. This indicates the need to exploit methods that have not been utilized fully yet, such as Integrated Energy Systems (IES). However, reducing the cost of a process is not enough. It needs to be scaled up to have a real impact on the situation at hand. Ion Transport Membranes (ITM) are promising in this aspect as they can produce large volumes of extremely high-purity oxygen at low costs. All these methods along with their economic aspects have been discussed and then compared to identify the most feasible one.
The organic wastes though biodegradable is harmful and pose a serious threat to the environment. This research focused to; harness the cellulose existing in the peels of vegetables, banana and bagasse to establish Hydroxymethyl furfural (HMF) bioresin. Eleven experiments were performed with different w/w% of DMSO and Sulphuric acid to find the best solvent extract. The FTIR-ATR validated sample 6 extract (10 w/w% at 98 contact h) as the prime compared to the other extracts. The conversion of cellulosic glucose to HMF was performed on 10 ml of sample 6 extract. The filtrate was further concentrated to 90% at 80°C. The HPLC analysis displayed 51% conversion of HMF from glucose. The universal testing machine (UTM) test executed on the HMF resin laid on the wood veneers exhibited good curing and tensile strength (18.5 MPa). The physical property of HMF lies close to the commercially available wood resin in the market.
‘Water, water everywhere but not a drop of water to drink’ was the situation then but now it is almost same except that ‘people, people everywhere and no water left to drink’. The world is facing severe water crisis and the worst hit people are the population of the developing countries like India. Today, agricultural water consumption is at 38% with 32% agricultural drainage. Municipal water consumption stands at 3% and civil waste water generation is 8%. In the decades to come, the water demand is predicted to increase significantly. Agrarian division is as of now in charge of 70% of water deliberations around the world. In addition to this, significant increase in thirst for water is predicted, particularly for industry and energy production. On an average, high-income countries treat about 70% of the wastewater they generate, while that proportion reaches below to 38% in upper middle-income countries and to 28% in lower middle-income countries. In low-income countries, only 8% of industrial and municipal wastewater is subjected to treatment of any kind. This further aggravates the situation for the poor, particularly in slums, who are often directly exposed to untreated wastewater due to a lack of water and sanitation services (UN Report 2017). This also calls for innovative and more efficient water treatment technology that not only treats water but also makes it potable for human consumption. Conventional waste water treatment technologies are able to convert waste water into water suitable for agriculture and associated purposes rather than drinking. Hence there is a need for improving the efficacies of available water treatment methods to make water fit for drinking besides the use of novel treatment technologies. This study presents a review on the use of nanoparticles as chief water treatment precursors, advantages of application of nanotechnology in wastewater treatment over conventional methodologies along with focus on the disadvantages inherent with the use of nanotechnology for waste water treatment.
In this research hydroxyl methyl furfural (HMF) resin, was developed from cellulosic glucose as a precursor from finely powdered greens and fruit peels. The HMF was synthesised from glucose in DMSO after hydrolysis and dehydration using HCl catalyst. Further extraction of HMF resin was accomplished using a mixture of 2 mL of 2-butanol, 2 mL of 50% of NaCl solution and 1 mL of tetrahydrofuran (THF)in the HMF synthesised solution. The HMF obtained was characterised by NMR and FTIR-ATR that confirmed the presence of HMF. The crude HMF resin acquired was purified by crystallization to increase the conversion of HMF resin from 51–92%. The ISO848 boiling test exhibited that resin has high moisture resistance and bond strength in HMF wood composite. The SEM morphological studies proved of no voids. The HMF/Wood composite tensile strength, according to ASTM D 7031-04demonstrated good strength (21.5MPa) comparable to other phenolic composites.