Considered from medical, social or economic perspectives, the cost of musculoskeletal injuries experienced in the workplace is substantial, and there is a need to identify the most efficacious interventions for their effective prevention, management and rehabilitation. Previous reviews have highlighted the limited number of studies that focus on upper extremity intervention programmes. The aim of this study was to evaluate the findings of primary, secondary and/or tertiary intervention studies for neck/upper extremity conditions undertaken between 1999 and 2004 and to compare these results with those of previous reviews. Relevant studies were retrieved through the use of a systematic approach to literature searching and evaluated using a standardised tool. Evidence was then classified according to a “pattern of evidence” approach. Studies were categorised into subgroups depending on the type of intervention: mechanical exposure interventions; production systems/organisational culture interventions and modifier interventions. 31 intervention studies met the inclusion criteria. The findings provided evidence to support the use of some mechanical and modifier interventions as approaches for preventing and managing neck/upper extremity musculoskeletal conditions and fibromyalgia. Evidence to support the benefits of production systems/organisational culture interventions was found to be lacking. This review identified no single-dimensional or multi-dimensional strategy for intervention that was considered effective across occupational settings. There is limited information to support the establishment of evidence-based guidelines applicable to a number of industrial sectors.
Repetitive, flexed lumbar postures are a risk factor associated with low back injuries. Young, novice workers involved in manual handling also appear at increased risk of injury. The evidence for the effectiveness of postural biofeedback as an intervention approach is lacking, particularly for repetitive, fatiguing tasks. How does real-time lumbosacral (LS) postural biofeedback modify the kinematics and kinetics of repetitive lifting and the risk of low back injury? Thirty-four participants were randomly allocated to two groups: biofeedback (BF) and non-biofeedback (NBF). Participants repetitively lifted a 13 kg box at 10 lifts per minute for up to 20 min. Real-time biofeedback of LS posture occurred when flexion exceeded 80% maximum. Three-dimensional motion analysis and ground reaction forces enabled estimates of joint kinematics and kinetics. Rating of perceived exertion (RPE) was measured throughout. The BF group adopted significantly less peak lumbosacral flexion (LSF) over the 20 min when compared to the NBF group, which resulted in a significant reduction in LS passive resistance forces. This was accompanied by increased peak hip and knee joint angular velocities in the BF group. Lower limb moments did not significantly differ between groups. Feedback provided to participants diminished beyond 10 min and subjective perceptions of physical exertion were lower in the BF group. Biofeedback of lumbosacral posture enabled participants to make changes in LSF that appear beneficial in reducing the risk of low back injury during repetitive lifting. Accompanying behavioural adaptations did not negatively impact on physical exertion or lower limb joint moments. Biofeedback of LS posture offers a potential preventative and treatment adjunct to educate handlers about their lifting posture. This could be particularly important for young, inexperienced workers employed in repetitive manual handling who appear at increased risk of back injury.
4 December 2025 in Artificial Intelligence in Medicine
Recent advancements in computer vision recognition combined with the use of pose estimation algorithms has led to a rapid increase in the use of 3D video-based markerless (ML) motion capture to study human movement. One such prominent system is Theia3D. To determine the accuracy, validity, and reliability of Theia3D, a systematic literature review was conducted across five electronic databases using the PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines. Studies were included if they investigated the accuracy, validity, or reliability of Theia3D against a standardised method and reported on at least one biomechanical measure. A modified version of COSMIN (Consensus-based Standards for the Selection of Health Measurement Instruments) and GRADE (Grading of Recommendations Assessment, Development, and Evaluation) were used to evaluate the quality of evidence. Sixteen studies met the inclusion criteria, the majority of which assessed the validity of kinematics during gait or running. Pooled lower limb kinematics showed reasonable accuracy, whilst hip flexion/extension and rotations of the lower limb joints in the transverse plane suggests poor accuracy. Most spatiotemporal gait parameters measured using Theia3D demonstrated excellent validity (Intraclass correlation coefficient (ICC) > 0.9) and inter-session reliability (gait speed, Standard Error of Measurement (SEM) ≤ 0.07 m/s; step/stride length, SEM ≤ 0.06 m; ICC > 0.95). The accuracy, validity, and reliability of Theia3D used in the biomechanical analysis of functional tasks and in different population groups shows promise. However, there is a need for improved methods by which to compare data and a standardisation of biomechanical modelling approaches.