The method and results of evaluating the kinetics of austenite isothermal decomposition in austempered ductile iron (ADI) samples are presented based on the dimensional changes in austenitized and isothermally hardened cast iron samples. Experimental measurements were carried out on samples intended for the production of ADI castings under industrial conditions of ODLEWNIE POLSKIE S.A. A partial solution of the Kolmogorov–Johnson–Mehl–Avrami statistical theory of phase transformations as proposed by Avrami was applied to analyze the experimental results of dilatometric measurements. It is shown that Avrami diagrams can be used to evaluate changes in the kinetics of phase transformations occurring in ADI samples during the first stage of isothermal austenite decomposition. The application of the proposed method has made it possible to identify three steps of ausferrite growth during the first stage, with two statistically significant slowdowns. Using quantitative metallography methods, it is demonstrated that the slowdown in the rate of austenite decomposition during the transition from the first to the second step is related to the development of the microstructure of the metallic matrix of cast iron.
30 June 2025 in Journal of Casting & Materials Engineering
Solution strengthened ferritic cast iron is characterised in EN 1563:2018 (and also in ISO 1083:2018) as grades EN-GJS-450-18, EN-GJS-500-14 and EN-GJS-600-10. Machine and plant builders have been using this material in new designs since 2011. The strength and ductile properties, competitive in comparison with the previous classical ductile cast iron grades, make it possible to reduce the weight of castings. Particularly preferred is grade EN-GJS-600-10 with UTS min. 600 MPa and A min. 10%. Strengthening of the ferritic matrix is possible due to the content of approximately 4.2% of silicon in the cast iron. In casting practice, this material is difficult to produce in a stable manner due to the frequent occurrence of degenerate Chunky graphite in the casting structure, resulting in a loss of ductile properties of the cast iron. In this article, an analysis has been made, based on literature, of the occurrence of strong negative segregation of silicon in classical ductile cast iron. Own research has confirmed the occurrence of chunky graphite in the cast. Dendritic crystallisation of austenite and strong segregation of silicon favours the formation of Chunky graphite. A much stronger proportion of silicon was found in the Chunky graphite zone, compared to the adjacent ball graphite zone. The introduction of micro-additives into the liquid melt eliminated the presence of Chunky graphite in the casting. The applied modifiers of graphite and metal matrix (hybrid modification) seem to be an effective method to stabilise the technological process of this innovative casting material.
22 December 2025 in Archives of Foundry Engineering
Austempered Ductile Iron (ADI) casting technology is a combination of the smelting process, its post-furnace treatment and the heat treatment of castings. Maintaining the process parameter stability of this innovative high quality cast iron with high Tensile Strength UTS and ductility properties is the aim of a number of studies on the control of graphitization inoculation and inoculation of the metal matrix. The ability to graphitise the liquid alloy decreases with its holding in the furnace, time of pouring into moulds from pouring machines. The tendency to dendritic grains crystallization and the segregation of elements such as Si, Ni and Cu decrease the ductile properties. The austenitizing process can introduce austenite grains growth negatively affecting of the ausferrite morphology. The modifying effect of small amounts of additives on the metal matrix in steel and low alloy cast steel, well known in materials engineering, has been applied to ADI. The addition of cast iron chips, Fe-V and Fe-Nb to the liquid alloy in the first inoculation is an example of a hybrid interaction. The introduction of graphitization nucleus particles and austenite crystallisation nucleus particles resulted in a stabilisation of the ductility of ADI and an increase in mechanical properties. Grains refinement of the primary austenite and precipitation hardening of ausferrite stabilise the mechanical properties of ADI. As a result of graphitization and additive structure inoculation, graphite and ausferrite morphology is improved. The obtained results point the way to further research in the field of hybrid inoculation of Ductile Cast Iron.
This study evaluated the effect of austempering on the microstructure, mechanical properties, and dry-sliding wear performance of EN-GJS-800-8 ductile iron produced as cross-step castings with wall thicknesses of 8, 17, 38, and 48 mm. As-cast and heat-treated specimens were examined by optical microscopy and quantitative image analysis, Brinell hardness, tensile and Charpy impact testing, ball-on-disk testing, and three-dimensional confocal profilometry. Austenitization at 880–890 °C for 2.5 h followed by austempering at 370–380 °C for 2 h produced an optically homogeneous acicular matrix consistent with ausferrite in all investigated sections and reduced the wall-thickness-related variation in hardness. The average hardness reached 296.4 HBW, the ultimate tensile strength 935 MPa, and elongation 8.6%. The mean Charpy impact energy increased from 5.12 to 10.06 J. The wear-track cross-sectional area decreased from approximately 2.98 × 104 to 210 μm2, while the maximum track depth decreased from 43.5 to 3 μm. The selected heat-treatment cycle therefore improved strength, impact-energy absorption, and wear resistance while promoting a more uniform response across the casting sections.
30 June 2025 in Journal of Casting & Materials Engineering
Solution strengthened ferritic cast iron is characterised in EN 1563:2018 (and also in ISO 1083:2018) as grades EN-GJS-450-18, EN-GJS-500-14 and EN-GJS-600-10. Machine and plant builders have been using this material in new designs since 2011. The strength and ductile properties, competitive in comparison with the previous classical ductile cast iron grades, make it possible to reduce the weight of castings. Particularly preferred is grade EN-GJS-600-10 with UTS min. 600 MPa and A min. 10%. Strengthening of the ferritic matrix is possible due to the content of approximately 4.2% of silicon in the cast iron. In casting practice, this material is difficult to produce in a stable manner due to the frequent occurrence of degenerate Chunky graphite in the casting structure, resulting in a loss of ductile properties of the cast iron. In this article, an analysis has been made, based on literature, of the occurrence of strong negative segregation of silicon in classical ductile cast iron. Own research has confirmed the occurrence of chunky graphite in the cast. Dendritic crystallisation of austenite and strong segregation of silicon favours the formation of Chunky graphite. A much stronger proportion of silicon was found in the Chunky graphite zone, compared to the adjacent ball graphite zone. The introduction of micro-additives into the liquid melt eliminated the presence of Chunky graphite in the casting. The applied modifiers of graphite and metal matrix (hybrid modification) seem to be an effective method to stabilise the technological process of this innovative casting material.