Ytterbium-doped femtosecond fiber lasers are widely used in scientific research, industrial processing, and other fields due to their high quantum efficiency, wide gain bandwidth, and compact structure. This article addresses the problems of low processing efficiency and difficulty in increasing the average power of femtosecond lasers. A high repetition rate fiber chirped pulse amplification system is built, which uses a high repetition rate Figure-9 fiber laser as the seed source and an acousto-optic modulator (AOM) to shape the dense pulse train in the time domain. The main amplification stage uses a large mode field ytterbium-doped fiber to achieve full fiberization of the amplification system, and a volume grating (VBG) is selected as the pulse compressor to make the laser system highly integrated. When the repetition rate is 67.5 MHz, the compressed output laser has an average power of 20.5 W, a pulse width of 447 fs, a pulse train energy of 750 μJ, a spot ellipticity of 0.96, and a beam quality M2 better than 1.4 (, ).
This work presents the design and implementation of an all-polarization-maintaining figure-9 erbium-doped fiber laser operating in the dispersion-managed soliton regime. By adjusting the pump power, intracavity splitting ratio, and polarization state, various stable mode-locked pulse regimes were achieved. Experimentally, stable single-pulse operation, composite bound states, tightly bound states, loosely bound states, and multi-pulse states consisting of two to five pulses at pump powers of 420 mW, 520 mW, 630 mW, and 740 mW were successfully obtained. The experimental results contribute to a deeper understanding of multi-soliton dynamics. Moreover, the laser features a simple structure, self-starting operation, stable operation, and flexible control of mode-locking states, and may therefore provide a potential approach for related application studies.