Cicek Cicek

Dr. Cicek Cicek


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2018 in International Journal of Geomechanics
Verified
Journal Article
Closed access
CCCicek Cicek
Cicek Cicek
EROL GULEREROL GULER
EROL GULER
TYTemel Yetimoglu
Temel Yetimoglu
This study investigated the additional vertical stress (Δσ) change occurring under the centerline of a continuous footing on geotextile-reinforced soil. For different reinforcement parameters and conditions, load tests and finite-element model (FEM) analyses were performed. It was determined that the presence of reinforcements reduces the additional vertical stress values. There is a good correlation in some cases between experimental measurements and FEM results, but the values obtained are different from the values proposed based on theoretical considerations developed for uniform materials. Each additional reinforcement layer affects Δσ, and different parameters can affect the values of Δσ. It was determined that the reinforcements create a discontinuity in the triangular failure wedge under the footing, thereby affecting the additional stress developed.

1 October 2014 in International Journal of Geomechanics
Verified
Journal Article
Closed access
CCCicek Cicek
Cicek Cicek
EROL GULEREROL GULER
EROL GULER
TYTemel Yetimoglu
Temel Yetimoglu

19 August 2017 in Scientia Iranica
Verified
Journal Article
Open access
PDF file
CCCicek Cicek
Cicek Cicek
EROL GULEREROL GULER
EROL GULER
TYTemel Yetimoglu
Temel Yetimoglu
In this study, the performance of the first reinforcement layer depth for sand subbase of a road or construction was investigated with plate load laboratory tests. Unreinforced and reinforced experiments for different reinforcement types were made by changing the first reinforcement layer depth ratio. One type of geotextile and two different geogrid specimens were used in the research. Load-settlement curves and Bearing Ratios were studied by measuring the results for different settlement ratios. Finally, laboratory measurements of unreinforced and reinforced soil using geotextile reinforcement were compared with Finite Element Model (FEM) analyses modeled under similar conditions. The results demonstrated the effects of different types of reinforcements for different first reinforcement layer locations. The number of reinforcement layers was another parameter which affected the bearing ratio along with the first reinforcement layer depths. It was also observed that the Bearing Ratio (BR) and load-settlement behavior changed significantly with the first reinforcement depth and settlements. Effects on failure modes for unreinforced and reinforced sand soils were compared for each test.

27 March 2023 in Journal of Polytechnic
Verified
Journal Article
Closed access
PDF file
CCCicek Cicek
Cicek Cicek
VBVolkan Buyukakin
Volkan Buyukakin
In this study, California Bearing Ratio (CBR) tests in a laboratory were performed to observe the behaviour of granular layer fills reinforced with discrete fibers. Six different fiber types were used in granular road layer by using different methods. Firstly, fibers were added in the road as a layer, then they mixed with soil particles, and as a third method they mixed with soil by laying a geotextile in the road layer, in other words it was used as combine reinforced model. And as the last method only a geotextile was laid and used in the pavement soil. By using these methods, the influence of different type of reinforcements on CBR and bearing capacity ratio values were investigated. Additionally, effects on the pavement layer thickness were calculated and for the best configuration of fiber reinforced sample a cost analysis was conducted. As a result of the study, CBR test values for each fiber type used in the study have different values, and for small penetration levels some test results show no improvement for bearing capacity ratio of the road. It was noticed that when increasing the penetration level, the bearing capacity ratios have larger values. Thus, cost and layer thickness numbers were various for different reinforced road layer models. Therefore, in the real life road projects before using fiber types, cost and performance analysis should be made to determine the more effective one. Bilindiği gibi, lifler yol üstyapısının tasarımı için iyileştirme malzemelerinden biri olabilir. Ancak farklı tiplerin California Rulman Oranı (CBR) ve kaplama kalınlığı üzerindeki etkileri henüz bilinmemektedir. Bu nedenle, bu çalışmada granüler kaplama tabakasında farklı yöntemlerle altı farklı lif türü kullanılmıştır. Kompozit donatılı modeller için öncelikle kaplama tabakasına lifler katman olarak eklenmiş, daha sonra toprakla karıştırılmış ve son olarak toprakla karıştırılmış ve katman olarak geotekstil eklenmiştir. Bu üç yöntem kullanılarak farklı tipteki donatıların CBR ve taşıma gücü oranı değerlerine etkisi araştırılmıştır. Ek olarak, kaplama tabakası kalınlığı üzerindeki etkiler hesaplanmış ve lif takviyeli numunenin en iyi konfigürasyonu için bir maliyet analizi yapılmıştır. Çalışma sonucunda, farklı liflerin farklı davranışlar gösterebildiği ve küçük penetrasyon seviyeleri için bazılarının CBR değerlerini iyileştiremediği ve artan penetrasyon taşıma kapasite oranları artırıldığı gözlenmiştir. Bu nedenle gerçek projeler için lif donatı kullanmadan önce maliyet ve performans analizi yapılması gerekliliği belirlenmiştir.

1 July 2020 in Doğal Afetler ve Çevre Dergisi
Verified
Journal Article
Open access
PDF file
CCCicek Cicek
Cicek Cicek
Tr en Bu çalışmada, doğal ve atık malzemelerin geri kazanımından elde edilen yeni malzemeler ile oluşturulmuş yol dolgusu modelleri sonlu elemanlar yöntemi kullanılarak analiz edilmiştir. Kumlu silt, kaya agregası, beton, cam gibi farklı malzemelerin yol dolgusuna etkileri incelenmiş ve atık liflerin yol dolgusunda kullanıldığı modellerin analiz sonuçları doğal koşullar ile karşılaştırılmıştır. Ayrıca farklı geosentetik donatı sayıları ile güçlendirilmeye çalışılan yol dolgusu modelleri için de hesaplamalar yapılmıştır. Böylece oluşturulan yol modelinin güvenlik sayısına farklı malzemelerin, liflerin ve geosentetik sayısının etkileri incelenmiştir. Yolun ani göçmesine karşı değerlendirmeler yapılarak, dolgu altındaki yeraltı suyundan kaynaklanacak konsolidasyon davranışının da etkileri farklı malzeme koşulları için karşılaştırılmıştır. Ayrıca, farklı malzemeler kullanılarak inşa edilen dolgularda yolun farklı bölgelerinde trafik yükünden oluşabilecek oturma farkları da değerlendirilmiş ve geosentetiğin etkileri de belirlenmeye çalışılmıştır. Sonuçlar incelendiğinde hem çevreci hem de daha verimli çözümler için değerlendirmeler yapılmıştır. Atık malzemelerin geri dönüşümü ile elde edilen malzemelerin, yol dolgularının stabilite ve güvenlikleri için önemli katkılar sağlayabileceği gözlenmiştir. In this study, road embankment models constructed with new materials obtained from the recycling of natural and waste materials were analysed using the finite element method. The effects of different materials such as sandy silt, rock aggregate, concrete, glass on the road fill were investigated and the results of the analysis of the models using waste fibers in the road fill were compared with the natural conditions. In addition, calculations have been made for road embankment models which are tried to be reinforced with different numbers of geosynthetic reinforcement. Thus, the effects of different materials, fibers and geosynthetics on the number of safety of the road model created were examined. Evaluations were made against the collapse of the road and the effects of the consolidation behaviour arising from groundwater under filling were compared for different material conditions. In addition, the residence differences that may be caused by traffic load in different parts of the road in the fillings constructed using different materials were evaluated and the effects of geosynthetics were tried to be determined. When the results were examined, evaluations were made for both environmental and more efficient solutions. It has been observed that the materials obtained by recycling of waste materials can make significant contributions to the stability and safety of road embankments.