Explore full metrics on Scilit
(Calculated once Scilit publication data is synced: current year − year of first publication + 1)
<mml:math display="inline"><mml:mrow><mml:mi>Ni</mml:mi><mml:mrow><mml:mo>–</mml:mo></mml:mrow><mml:mi>Cr</mml:mi></mml:mrow></mml:math>Ni–Cr (cell I) and <mml:math display="inline"><mml:mrow><mml:mi>Ni</mml:mi><mml:mrow><mml:mo>–</mml:mo></mml:mrow><mml:mi>Al</mml:mi></mml:mrow></mml:math>Ni–Al (cell II) anodes while under varying pressures up to <mml:math display="inline"><mml:mrow><mml:mn>3</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>atm</mml:mi></mml:mrow></mml:math>3atm . Inert gas step addition (ISA) and steady-state-polarization methods were employed. These methods revealed that cell I showed a lower anodic and cathodic overpotential ascribed to the gas-phase mass-transfer process compared to cell II. The results of the Hg porosimetry show that the <mml:math display="inline"><mml:mrow><mml:mi>Ni</mml:mi><mml:mrow><mml:mo>–</mml:mo></mml:mrow><mml:mi>Al</mml:mi></mml:mrow></mml:math>Ni–Al anode has a more uniform pore structure with a smaller amount of small-size pores compared to the <mml:math display="inline"><mml:mrow><mml:mi>Ni</mml:mi><mml:mrow><mml:mo>–</mml:mo></mml:mrow><mml:mi>Cr</mml:mi></mml:mrow></mml:math>Ni–Cr anode, which implies that the anode of cell II <mml:math display="inline"><mml:mrow><mml:mo>(</mml:mo><mml:mi>Ni</mml:mi><mml:mrow><mml:mo>–</mml:mo></mml:mrow><mml:mi>Al</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:math>(Ni–Al) has a lower electrolyte content, resulting in a larger overpotential due to the increased diffusion resistance inside the pores. Both cells showed enlarged gas-phase-resistance induced overpotential at <mml:math display="inline"><mml:mrow><mml:mn>3</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>atm</mml:mi></mml:mrow></mml:math>3atm of pressure. Theoretically, reduced gas-phase diffusivity and flow velocity under pressurized conditions increase gas-phase mass-transfer resistance and its overpotential. However, pressurization reduces the overpotential of the liquid-phase mass-transfer resistance, which results in a total overvoltage decrease under pressurization.No biography provided yet