This manuscript experimentally validates a thin-film polymer and multimode fiber optic interaction-based low-cost optical fiber displacement sensor. The sensing setup is operated by deflecting a commercially Mylar® polymer film using multimode optical fiber. The sensor exhibits a higher sensitivity of 24nm/μm and resolution of 41.6nm. The sensor’s analyses also demonstrate good polynomial approximation, with a maximal adjusted square of R=0.9801, and high stability, in which minimal power (0.4dBHour) and wavelength (<2nm-Hour) variations are observed. Moreover, thermal experiments prove that the sensor has lower temperature traits (0.05μm/°C), and this parameter can be distinguished considering the wavelength shifting direction. The simplicity of the scheme, as well as the cost of the elements involved, make this technique a reliable alternative to detect micro-displacements.
1 November 2020 in Sensors and Actuators A: Physical
A curvature sensing Ytterbium-doped fiber ring, using a Thin Core Fiber Modal Interferometer (TCFMI) was experimentally demonstrated in this work. The TCFMI was implemented by fusion splicing a segment of a thin-core fiber, with a small core diameter, between two single-mode fiber sections. The proposed TCFMI functioned as a wavelengthselective filter in the fiber ring laser cavity. It was optimized to achieve a Side Mode Suppression Ratio (SMSR) of 35 dB; the laser emission produced a sensor resolution of 0.37 nm. The experimental results also showed a high curvature sensitivity close to -38.26 nm/m-1 from 0 m-1 to 0.399 m-1 curvature range. Here, the laser sensor exhibited a bandwidth of 16 nm in the 1072 nm to 1056 nm wavelength range. The fiber ring laser is a lowcost alternative for curvature sensing applications.
1 August 2017 in Sensors and Actuators A: Physical
A tunable multi-wavelength fiber laser is proposed and demonstrated based on two main elements: an erbium-doped fiber ring cavity and compact intermodal fiber structure. The modal fiber interferometer is fabricated using the cost-effective arc splice technique between conventional single-mode fiber and microfiber. This optical fiber structure acts as a wavelength filter, operated in reflection mode. When the refractive index and temperature variations are applied over the fiber filter, the ring laser cavity provides several quad-wavelength laser spectra. The multi-wavelength spectra are tuned into the C-band with a resolution of 0.05 nm. In addition, the spectra are symmetric with minimal power difference between the lasing modes involved, and the average of the side mode suppression ratio is close to 37 dB. This laser offers low-cost implementation, low wavelength drift, and high power stability, as well as an effect of easy controllability regarding tuned multi-wavelength.