We believe a point-of-care (PoC) device for the rapid detection of the 2019 novel Coronavirus (SARS-CoV-2) is crucial and urgently needed. With this perspective, we give suggestions regarding a potential candidate for the rapid detection of the coronavirus disease 2019 (COVID-19), as well as factors for the preparedness and response to the outbreak of the COVID-19.

In this contribution, we present for the first time the experimental results of energy conversion from the streaming current when a polymer is added to the working solution. We added polyacrylic acid (PAA) in concentrations of 200 ppm to 4000 ppm to a KCl solution. By introducing PAA, the input power, which is the product of volumetric flow rate and the applied pressure, reduced rapidly as compared to the case of using only a normal viscous electrolyte KCl solution. The output power at the same time remained largely constant, whereby an increase of the streaming current and a decrease of the streaming potential simultaneously occurred. These combined factors led to the massive increase of the energy conversion efficiency. Particularly, the results showed that when PAA was in a 0.01 mM KCl solution, the energy conversion efficiency of the system was enhanced by a factor of 447 (±2%), as compared to the case of the solution containing only 0.01 mM KCl. An enhancement factor of 249 (±4%) was also observed when PAA was added to the higher ionic strength background solution, 1 mM KCl. This finding can have practical use in microchannel-array energy conversion systems. When, instead of the negatively charged PAA, a non-ionic polymer polyethylene oxide (PEO) was added to the solution, no efficiency increase was observed, probably due to polymer wall adsorption.

Microcontrollers are programmable, integrated circuit chips. In the last two decades, their applications to industrial instruments, vehicles, and household appliances have reached the extent that microcontrollers are now the number-one selling electronic chip of all kinds. Simultaneously, the field of lab-on-a-chip research and technology has seen major technological leaps towards sample handling, sample preparation, and sensing for use in molecular diagnostic devices. Yet, the transformation from a laboratory based lab-on-a-chip technology to actual point-of-care device products has largely been limited to a fraction of the foreseen potential. We believe that increased knowledge of the vast possibilities that becomes available with open source microcontrollers, especially when embedded in easy-to-use development environments, such as the Arduino or Raspberry Pi, could potentially solve and even bridge the gap between lab-on-a-chip technology and real-life point of care applications. The profuse availability and extraordinary capabilities of microcontrollers, namely within computation, communication, and networking, combined with easy-to-use development environments, as well as a very active and fast moving community of makers, who are eager to share their knowledge, could potentially be the difference between a dreadful “chip-in-a-lab”-situation, and the next successful start-up. Here follows a brief insight into how open source microcontrollers could potentially have a transformative effect on the field of lab-on-a-chip research and technology. Details in some specific areas of application are briefly treated before addressing challenges and future perspectives.