Jorge Omar Gil Posada

Dr. Jorge Omar Gil Posada


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2014 in Journal of Power Sources
Verified
Journal Article
Open access
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
PHPeter J. Hall
Peter J. Hall
Iron electrodes were prepared by hot-pressing iron-polyethylene based formulations on nickel foam stripes. NiFe cells were tested by using commercial nickel electrodes and our iron electrodes. Post-hoc comparisons were used to identify meaningful differences between iron electrode formulations (based upon bismuth, bismuth sulphate, potassium sulphide and iron sulphide as additives). Our results confirm that both bismuth sulphide and iron sulphide favour the process of charge/discharge of a NiFe cell. In addition, we have found that the use of metallic bismuth only marginally influences coulombic efficiency; likewise, the presence of the soluble bisulfide anion is not sufficient to increase coulombic efficiency. Finally, NiFe cells prepared with bismuth sulphide outperformed their iron sulphide counterparts

1 October 2016 in International Journal of Hydrogen Energy
Verified
Journal Article
Open access
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
AAAbdallah H. Abdalla
Abdallah H. Abdalla
COCharles I. Oseghale
Charles I. Oseghale
PHPeter J. Hall
Peter J. Hall
Multiple regression analysis was used to investigate the effect of bismuth sulphide and iron sulphide as anode additives for NiFe cells. With this in mind, in-house made Fe/FeS/Bi2S3 based electrodes were cycled against commercially available nickel electrodes. A simplex centroid design was used to investigate the combined effects of any of the aforementioned additives on cell performance. The manuscript ends with an initial look at electrolyte systems as a means to further improve the performance of our cells. Finally, our findings support the idea that HS- ions improve the overall performance of NiFe cells

1 December 2016 in International Journal of Hydrogen Energy
Verified
Journal Article
Open access
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
PHPeter J. Hall
Peter J. Hall
Aiming to develop a cost effective means to store large amounts of electric energy, NiFe batteries were produced and tested under galvanostatic conditions at room temperature. Multiple regression analysis was conducted to develop predictive equations that establish a link between hydrogen evolution and electrode manufacturing conditions, over a wide range of electrode/electrolyte systems. Basically, the intent was to investigate the incidence of lithium hydroxide and potassium sulphide as electrolyte additives on cell performance. With this in mind, in-house built Fe/FeS based electrodes were cycled against commercially available nickel electrodes on a three electrode cell configuration. A 3 × 4 full factorial experimental design was proposed to investigate the combined effect of the aforementioned electrolyte additives on cell performance. As a consequence, data from 144 cells were finally used in conducting the analysis and finding the form of the predictive equations. Our findings suggest that at the level of confidence alpha = 0.05, the presence of relatively large amounts of the soluble bisulphide would enhance the performance of the battery by reducing electrolyte decomposition

1 September 2014 in Journal of Power Sources
Verified
Journal Article
Open access
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
PHPeter J. Hall
Peter J. Hall
In this article, we use a surface response approach to investigate the effect of bismuth sulphide as well as the compositions of PTFE in the overall columbic efficiency of a NiFe cell battery. Our results demonstrate that while bismuth sulphide favours the process of charge/discharge of a NiFe cell, the use of metallic bismuth only marginally influences coulombic efficiency. In addition we had found that the presence of the soluble bisulfide anion is not sufficient to increase coulombic efficiency in NiFe cells

9 January 2016 in Journal of Applied Electrochemistry
Verified
Journal Article
Open access
PDF file
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
PHPeter J. Hall
Peter J. Hall
NiFe batteries are emerging as an important energy storage technology but suffer from a hydrogen-producing side reaction which has safety implications and

15 March 2023 in Bioelectrochemistry
Verified
Journal Article
Open access
CMCarlos Alberto García Mogollón
Carlos Alberto García Mogollón
JDJuan Carlos Quintero Díaz
Juan Carlos Quintero Díaz
JPJorge Omar Gil Posada
Jorge Omar Gil Posada
This manuscript describes the effect of altering the extracellular redox potential during the production of acetone, butanol, and ethanol on a dual chamber H-type microbial fuel cell by fermenting glucose with Clostridium saccharoperbutylacetonicum N1-4. Extracellular redox potential modification was achieved by either supplementing the microbial broth with the redox agent NADH or by poising the cathode potential at -600 mV vs. Ag/AgCl. The addition of NADH was found to foment the production of acetone via fermentation of glucose. The addition of 200 mM of NADH to the catholyte rendered the highest production of acetone (2.4 g L-1), thus outperforming the production of acetone by conventional fermentation means (control treatment) by a factor of 2.2. The experimental evidence gathered here, indicates that cathodic electro-fermentation of glucose favors the production of butanol. When poising the cathode potential at -600 mV vs Ag/AgCl (electro-fermentation), the largest production of butanol was achieved (5.8 g L-1), outperforming the control treatment by a factor of 1.5. The production of ABE solvents and the electrochemical measurements demonstrate the electroactive properties of C. saccharoperbutylacetonicum N1-4 and illustrates the usefulness of bio-electrochemical systems to improve conventional fermentative processes.