Liquid-repellent surfaces have been extensively investigated due to their potential application in several fields. Superhydrophobic surfaces achieve outstanding water repellence, however their limited durability in severe operational conditions hinders their large-scale application. The Slippery, Liquid-Infused Porous Surface (SLIPS) approach solves many of the durability problems shown by superhydrophobic surfaces due to the presence of an infused liquid layer. Moreover, SLIPS show enhanced repellence towards low surface tension liquids that superhydrophobic surfaces cannot repel. In this perspective, SLIPS assume significant potential for application in harsh environments; however, a systematic evaluation of their durability in different conditions is still lacking in the literature. In this work, we report the fabrication of SLIPS based on a ceramic porous layer infused with different lubricants, namely perfluoropolyethers with variable viscosity and n-hexadecane; we investigate the durability of these surfaces by monitoring the evolution of their wetting behavior after exposure to severe environmental conditions like UV irradiation, chemically aggressive solutions (acidic, alkaline, and saline), and abrasion. Chemical composition and viscosity of the infused liquids prove decisive in determining SLIPS durability; especially highly viscous infused liquids deliver enhanced resistance to abrasion stress and chemical attack, making them candidates for applicable, long-lasting liquid-repellent surfaces.
Ice nucleation and accretion leads to multiple problems such as freezing of the streets which can cause traffic collisions or people injuries, and collapse of high voltage power lines leading to black-out and icing of aircraft components, causing major aeronautic accidents. The most widespread strategies for the removal of accumulated ice layers result in most cases being expensive, time-consuming and hazardous for the environment. In this work we present the design of hydrophobic hybrid inorganic-organic coatings via Lotus leaf-like and slippery liquid infused porous surfaces (SLIPS) approaches with reduced, lasting wetting performance in cold environments. Static and dynamic wetting behavior was evaluated at room and sub-zero temperatures. The main target was the selection of the most suitable design approaches and formulations of coatings to be applied on metals or alloys when the contact time between the droplet and the material surface has to be minimized. In the temperature range from −10 to 0 °C, we report evidence of a stable hydrophobicity and a low water contact angle hysteresis (below 15°) of all the SLIPS developed. The surfaces’ ability to keep their wetting performance unchanged during the freeze/and frost/thaw durability cycles stood out as a key issue for further development at larger scale.
The search for surfaces with non-wetting behavior towards water and low-surface tension liquids affects a wide range of industries. Surface wetting is regulated by morphological and chemical features interacting with liquid phases under different ambient conditions. Most of the approaches to the fabrication of liquid-repellent surfaces are inspired by living organisms and require the fabrication of hierarchically organized structures, coupled with low surface energy chemical composition. This paper deals with the design of amphiphobic metals (AM) and alloys by deposition of nano-oxides suspensions in alcoholic or aqueous media, coupled with perfluorinated compounds and optional infused lubricant liquids resulting in, respectively, solid–liquid–air and solid–liquid–liquid working interfaces. Nanostructured organic/inorganic hybrid coatings with contact angles against water above 170°, contact angle with n-hexadecane (surface tension γ = 27 mN/m at 20 °C) in the 140–150° range and contact angle hysteresis lower than 5° have been produced. A full characterization of surface chemistry has been undertaken by X-ray photoelectron spectroscopy (XPS) analyses, while field-emission scanning electron microscope (FE-SEM) observations allowed the estimation of coatings thicknesses (300–400 nm) and their morphological features. The durability of fabricated amphiphobic surfaces was also assessed with a wide range of tests that showed their remarkable resistance to chemically aggressive environments, mechanical stresses and ultraviolet (UV) radiation. Moreover, this work analyzes the behavior of amphiphobic surfaces in terms of anti-soiling, snow-repellent and friction-reduction properties—all originated from their non-wetting behavior. The achieved results make AM materials viable solutions to be applied in different sectors answering several and pressing technical needs.
16 September 2011 in IOP Conference Series: Materials Science and Engineering
Photocatalytic, highly hydrophilic industrial porcelain stoneware large slabs were realized by deposition of nanostructured TiO2 coatings. Different surface finishing and experimental conditions were considered in order to assess the industrial feasibility. Photocatalytic and wetting behaviour of functionalized slabs mainly depends on surface phase composition in terms of anatase/rutile ratio, this involving - as a key issue – the deposition of TiO2 on industrially sintered products with an additional annealing step to strengthen coatings' performances and durability.