This work presents a comparative study on the mechanical homogenisation of Triply Periodic Minimal Surface (TPMS) lattice structures in the linear elastic regime, which have attracted significant interest for their unique ability to combine lightweight design with tailored properties. The study investigates the effective mechanical behaviour of Representative Unit Cells (RUCs) generated using the open-source Python tool Microgen. Two homogenisation strategies are considered: (i) Finite Element (FE)-based homogenisation carried out in Abaqus, and (ii) the Mechanics of Structure Genome (MSG), a unified theory for multi-scale constitutive modelling, implemented in an in-house software tool. The comparison encompasses multiple TPMS topologies, including well-studied cases used for validation, namely gyroid and diamond, as well as less-explored ones, such as PMY and F-Rhombic Dodecahedron, to provide new insights. RUCs are analysed across relative densities ranging from 10 to 50%. Equivalent linear elastic properties (Young’s moduli, shear moduli, and Poisson’s ratios) are derived and compared to assess the consistency, accuracy, and computational efficiency of the two approaches. The results show that both methods yield effective properties with less than 1% difference between them, and less than 5% deviation from experimental data reported in the literature for the effective Young’s modulus. Furthermore, the anisotropy of each TPMS topology across the range of relative densities is examined through the directional distribution of Young’s moduli. The outcomes are expected to clarify the strengths and limitations of FE versus MSG in capturing the effective behaviour of architected cellular solids, thus supporting the selection of homogenisation strategies for the design of lattice-based lightweight structures.
This work presents a comparative study on the mechanical homogenisation of Triply Periodic Minimal Surface (TPMS) lattice structures, which have attracted significant interest for their unique ability to combine lightweight design with tailored properties. The study investigates the effective mechanical behaviour of Representative Unit Cells (RUCs) generated using the open-source Python tool Microgen. Two homogenisation strategies are considered: (i) Finite Element (FE)-based homogenisation carried out in Abaqus, and (ii) the Mechanics of Structure Genome (MSG), a unified theory for multi-scale constitutive modelling, implemented in an in-house software tool. The comparison encompasses multiple TPMS topologies, including well-studied cases used for validation, namely gyroid and diamond, as well as less-explored ones, such as PMY, and F-Rhombic Dodecahedron, to provide new insights. RUCs are analysed across relative densities ranging from 10 to 50%. Equivalent linear elastic properties (Young’s moduli, shear moduli, and Poisson’s ratios) are derived and compared to assess the consistency, accuracy, and computational efficiency of the two approaches. Furthermore, the anisotropy of each TPMS topology across the range of relative densities is examined through the directional distribution of Young’s moduli. The outcomes are expected to clarify the strengths and limitations of FE versus MSG in capturing the effective behaviour of architected cellular solids, thus supporting the selection of homogenisation strategies for the design of lattice-based lightweight structures.
Triply periodic minimal surface (TPMS)-based interpenetrating phase composites (IPCs) combine two co-continuous solid phases across a smooth, doubly curved interface, providing a multifunctional design space for tailoring mechanical and thermal properties. This study investigates the effective thermo-elastic and thermal-transport behavior of TPMS-based IPCs using two established homogenization approaches: finite element (FE)-based representative unit cell (RUC) homogenization and mechanics of structure genome (MSG)-based homogenization. Four TPMS topologies—gyroid, diamond (Schwarz D), PMY, and F-rhombic dodecahedron (F-RD)—are considered over TPMS-phase volume fractions ranging from 0.1 to 0.5. Conforming-mesh RUC models are generated using Microgen and analyzed in Abaqus for FE simulations with periodic boundary conditions, and in the in-house CmbsFE code for MSG-based homogenization. The two approaches are cross-verified for predicting effective elastic properties, coefficients of thermal expansion (CTEs), and thermal conductivities, and agree to within on identical meshes. On identical meshes the two approaches solve linear systems of the same size, and MSG requires fewer matrix decompositions. The study further examines the influence of TPMS topology and TPMS-phase volume fraction on the multifunctional response of two-phase IPCs, supporting the design and optimization of structural–thermal materials.
Triply Periodic Minimal Surface (TPMS)-based Interpenetrating Phase Composites (IPCs) combine two co-continuous solid phases across a smooth, doubly curved interface, providing a multifunctional design space for tailoring mechanical and thermal properties. This study investigates the effective thermo-elastic and thermal-transport behavior of TPMS-based IPCs using two homogenization approaches: Finite Element (FE)-based Representative Unit Cell (RUC) homogenization and Mechanics of Structure Genome (MSG)-based homogenization. Four TPMS topologies – gyroid, diamond (Schwarz D), PMY, and F-Rhombic Dodecahedron (F-RD) – are considered over relative densities ranging from 0.1 to 0.5. Conforming-mesh RUC models are generated using Microgen and analyzed in Abaqus for FE simulations with periodic boundary conditions, and in the in-house CmbsFE code for MSG-based homogenization. The two approaches are assessed for predicting effective elastic properties, coefficients of thermal expansion (CTEs), and thermal conductivities. The study further examines the influence of TPMS topology and relative density on the multifunctional response of two-phase IPCs, supporting the design and optimization of lightweight structural–thermal materials.