This research discusses the main factors effecting the permeability reduction due to cement infiltration or top soil masking when cement infiltrates in a river sediment matrix. This is relevant to the migration of pollutants to the groundwater through surface water infiltration, which is an important and urgent problem to resolve. A series of indoor infiltration simulations were performed to measure the infiltration reduction when the cement infiltrate in a selected soil matrix under different conditions (e.g. dry density, postponing time and waterhead, etc.). The infiltration in the cement-treated samples was compared with a reference infiltration with no cement masking or infiltrating. It was found that the infiltration rates of the cement-treated soils were consistently lower than the control sample, indicating an infiltration reduction due to cement infiltration. The average reduction ranged 3.59-44.33% depending on different processing methods. In this paper, some main factors affecting the permeability-reducing effect of cement infiltration in a river sediment matrix, such as the soil texture, dry density, postponing time of water supply, initial waterhead, and cement addition quantity, are discussed, and theories regarding cement infiltration mechanisms are presented.
Univariate analysis on the permeability-reducing effects of cement infiltration into sandy soil was carried out using a series of experiments on sandy soil infiltrated by adding fine cement grains. The SPSS statistical analysis software was used on these experimental data to construct multivariate prediction models on the permeability-reducing effects of cement infiltration into sandy soils. The results indicate that it is possible to predict permeability-reducing effects using transfer functions. Relatively satisfactory predictions were achieved by inputting the postponed time of water supply, soil dry density, quantity of added cement, water pressure head of cement infiltration, physical clay-silt particle content of soil, and other factors as independent variables. A comparison between the multivariate linear and non-linear models showed that the two models had similar accuracy. The multivariate linear model is relatively simple, and hence can be used to predict permeability-reducing effects. The development of the models has scientific implications for soil modification by altering soil permeability through cement infiltration. It also has practical significance in predictive research on reducing the migration of ground surface pollutants into groundwater.
The rational use of reclaimed water for irrigation is a vital strategy to alleviate water scarcity in arid and semi-arid regions. Assessing its impact on heavy metal behavior in soil–plant systems is crucial for ensuring agricultural safety. This study evaluated the effects of four irrigation water sources—well water (CK, control), river water (R0), a 1:1 mixture of river and reclaimed water (R1), and reclaimed water (R2)—on the distribution of heavy metals (Mn, Zn, Cu) in soil profiles and their accumulation in corn organs across growth stages. Results indicated that soil Mn content increased over time, whereas Zn and Cu levels generally decreased, with the smallest reduction observed in the R2 treatment at deeper soil layers. In corn, Mn and Cu were primarily concentrated in roots and leaves, while Zn accumulated notably in grains. Plant heavy metal content was generally lower under R2 than CK. Risk assessment indicated slight Mn pollution in soil, whereas Zn and Cu remained within safe limits. Health risk indices (THQ) for R1 and R2 were lower than CK. Overall, the mixed water treatment (R1) showed the strongest potential for controlling heavy metal contamination, suggesting that blended reclaimed water can support sustainable irrigation with long-term Mn monitoring recommended.