Xingnan Ren

Xingnan Ren


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 October 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
XPXuehao Pei
Xuehao Pei
LDLi Dai
Li Dai
CWCuili Wang
Cuili Wang
Junjie ZhongJunjie Zhong
Junjie Zhong
XRXingnan Ren
Xingnan Ren
NZNingtao Zhang
Ningtao Zhang
Understanding gas–water two-phase flow mechanisms in deep tight gas reservoirs is critical for improving production performance and mitigating water invasion. However, the effects of pore-throat-fracture multiscale structures on gas–water flow remain inadequately understood, particularly under high-temperature and high-pressure conditions (HT/HP). In this study, we developed visualizable multiscale throat-pore and throat-pore-fracture physical nanofluidic chip models (feature sizes 500 nm–100 μm) parameterized with Keshen block geological data in the Tarim Basin. We then established an HT/HP nanofluidic platform (rated to 240 °C, 120 MPa; operated at 100 °C, 100 MPa) and, using optical microscopy, directly visualized spontaneous water imbibition and gas–water displacement in the throat-pore and throat-pore-fracture nanofluidic chips and quantified fluid saturation, front velocity, and threshold pressure gradients. The results revealed that the spontaneous imbibition process follows a three-stage evolution controlled by capillarity, gas compression, and pore-scale heterogeneity. Nanoscale throats and microscale pores exhibit good connectivity, facilitating rapid imbibition without significant scale-induced resistance. In contrast, 100 μm fractures create preferential flow paths, leading to enhanced micro-scale water locking and faster gas–water equilibrium. The matrix gas displacement threshold gradient remains below 0.3 MPa/cm, with the cross-scale Jamin effect—rather than capillarity—dominating displacement resistance. At higher pressure gradients (~1 MPa/cm), water is efficiently expelled to low saturations via nanoscale throat networks. This work provides an experimental platform for visualizing gas–water flow in multiscale porous media under ultra-high temperature and pressure conditions and offers mechanistic insights to guide gas injection strategies and water management in deep tight gas reservoirs.

3 February 2026 in Geosciences
Verified
Journal Article
Open access
PDF file
FYFenglai Yang
Fenglai Yang
CWChenhui Wang
Chenhui Wang
FWFurong Wang
Furong Wang
LDLi Dai
Li Dai
HTHaifa Tang
Haifa Tang
JLJian Li
Jian Li
The efficient extraction of natural gas from water-drive reservoirs is often hindered by premature water breakthrough and the consequent trapping of significant residual gas, which collectively result in suboptimal recovery and economic returns. Traditional production methods have proven inadequate in mitigating water influx and mobilizing this trapped gas, underscoring the need for advanced enhanced gas recovery (EGR) strategies. This research specifically examines the potential of nitrogen injection as a tertiary recovery technique in such reservoirs, with a focus on its mechanistic role and displacement efficiency. Utilizing high-pressure core flooding experiments and complementary numerical simulations, the process of nitrogen injection following water flooding was systematically investigated. Experimental findings at 30 MPa indicate that while water flooding left a substantial residual gas saturation of 28.1%, subsequent nitrogen injection reduced this to 20.8% at breakthrough and ultimately to 7.99%, achieving a final recovery of 88.9%. Simulation results further elucidate that in fractured systems, water preferentially channels through high-permeability fractures, while capillary imbibition leads to gas entrapment within the matrix. Nitrogen injection effectively targets and reduces this trapped gas saturation by 30–50%, demonstrating its efficacy as a viable EGR method. The study thus provides critical theoretical and practical insights for improving recovery in challenging water-drive gas reservoirs.

18 December 2025 in Processes
Verified
Journal Article
Open access
PDF file
LDLi Dai
Li Dai
XRXingnan Ren
Xingnan Ren
CZChengze Zhang
Chengze Zhang
YQYuanji Qu
Yuanji Qu
BSBinghui Song
Binghui Song
WTWei Tian
Wei Tian
Natural fractures in tight sandstone reservoirs are the key factors controlling hydrocarbon flow and productivity. The Bozi-1 gas reservoir in the Kuqa Depression, as a typical ultra-deep tight sandstone gas reservoir, is characterized by low-porosity and ultra-low-permeability sandstones. This study addresses the limitations of previous fracture characterization, which primarily focused on macro-structural fractures while neglecting medium- and small-scale fractures. We integrate multi-source heterogeneous data, including core, well-logging imaging, seismic, and production observations, to systematically conduct multi-scale natural fracture characterization and modeling. First, the overall geology of the study area is briefly introduced, followed by a detailed description of the development characteristics of large-scale and medium–small-scale fractures, achieving a multi-scale representation of complex curved fracture networks. Finally, the three-dimensional multi-scale fracture model is validated using static indicators, including production characteristics, water invasion features, and well leakage data. The main findings are as follows: (1) Large-scale fractures in the Bozi-1 reservoir are mainly oriented near EW, NE–SW, and NW–SE, acting as the primary hydrocarbon migration pathways. Medium–small-scale fractures predominantly develop near SN, NE–SW, NW–SE, and near EW directions, exhibiting strong heterogeneity. (2) The complex curvature of large-scale fractures was captured by the “adaptive sampling + segmented splicing + equivalent distribution of fracture flow capacity” method, while the distribution of effective medium–small-scale fractures across the study area was represented using “single-well Stoneley wave inversion + seismic machine learning prediction”, achieving an 86% match with actual single-well measurements. (3) Model reliability was further verified through static comparisons, including production characteristics (unimpeded flow vs. effective fracture density, R2 = 0.92), water invasion features (fracture-dominated water invasion matching fracture distribution), and well leakage characteristics (matching rate of high fracture density zones: 84.2%). The results provide key technical support for the precise characterization of fracture systems and establish a model ready for dynamic simulation in ultra-deep tight sandstone gas reservoirs.