A new porous activated carbon (AC) material with very high specific surface area (3193 m2 g−1) was prepared by the carbonization of a colloidal silica-templated melamine–formaldehyde (MF) polymer composite followed by KOH-activation. Several electrical double-layer capacitor (EDLC) cells were fabricated using this AC as the electrode material. A number of organic solvent-based electrolyte formulations were examined to optimize the EDLC performance. Both high specific discharge capacitance of 130.5 F g−1 and energy density 47.9 Wh kg−1 were achieved for the initial cycling. The long-term cycling performance was also measured.
Lithium–sulfur battery (LSB) technology has tremendous prospects to substitute lithium-ion battery (LIB) technology due to its high energy density. However, the escaping of polysulfide intermediates (produced during the redox reaction process) from the cathode structure is the primary reason for rapid capacity fading. Suppressing the polysulfide shuttle (PSS) is a viable solution for this technology to move closer to commercialization and supersede the established LIB technology. In this review, we have analyzed the challenges faced by LSBs and outlined current methods and materials used to address these problems. We conclude that in order to further pioneer LSBs, it is necessary to address these essential features of the sulfur cathode: superior electrical conductivity to ensure faster redox reaction kinetics and high discharge capacity, high pore volume of the cathode host to maximize sulfur loading/utilization, and polar PSS-resistive materials to anchor and suppress the migration of polysulfides, which can be developed with the use of nanofabrication and combinations of the PSS-suppressive qualities of each component. With these factors addressed, our world will be able to forge ahead with the development of LSBs on a larger scale—for the efficiency of energy systems in technology advancement and potential benefits to outweigh the costs and performance decay.
When comes to very high energy density energy storage systems, the prospect of lithium-sulfur battery (LSB) technology is very promising. The major problem that prevents the commercial production of LSBs is their poor cycling life caused by the migration of polysulfide intermediates from the cathode structure to the anode. Confining sulfur and the discharged polysulfide intermediates inside conductive porous carbon matrices is regarded as a promising and effective strategy to overcome this problem. In this study, a new class of MnO2-coated sulfur-filled hollow carbon nanosphere (HCN)-based cathode materials has been prepared to improve the electrochemical performance of Li-S Cells. The cathode materials constructed with silica nanoparticle hard templates displayed a high initial capacity of 834 mAh g−1 with a capacity fading rate of 0.080% per cycle. This material also showed superior redox kinetics, which enabled the Li-S cells to run at a higher charging-discharging current density.
11 August 2007 in Journal of Solid State Electrochemistry