The ultra-high-speed permanent magnet motor has the characteristics of high-power density, small size, and high speed, but there are problems with it, such as generation of local excessive heat and obvious vibration and noise. In order to reduce the loss and improve the efficiency of the motor, in this study, ultra-thin silicon steel sheets are used as the material of the iron core of the motor, and two non-oriented silicon steel sheets with different thicknesses—0.05 and 0.15 mm—were selected. First, we use the Epstein square ring electrical steel sheet magnetic properties test to determine the magnetic properties and the loss properties of the two ultra-thin non-oriented silicon steel sheets under working conditions. Then, we use electromagnetic simulation software to calculate the magnetic performance and the temperature rise performance of two kinds of motors with different materials. Finally, through the test of the prototype, we know the difference in the influence of the two kinds of silicon steel sheets on the performance of air compressors. We hope the outcome of the study will provide technical support for optimizing the design of ultra-high-speed permanent magnet motors for air compressors.
The high-speed permanent magnet synchronous motor is one of the crucial components of air compressors, where motor efficiency and noise-vibration issues are the main challenges in the design of high-speed motors. Topology and soft magnetic materials commonly constitute the key factors behind the suitable design of high-speed motors that directly affect their performance. This study designs and analyzes four different 25 kW, 95 000 rpm air compressors with two types of topological structures, namely 6-slot 2-pole and 12-slot 4-pole (12S4P), using two different soft magnetic materials, namely thin 15SW1200 silicon sheet and amorphous magnetic alloy AYFA_Z. The obtained results demonstrate that the 12S4P motor, with amorphous alloy, achieves the highest efficiency. However, the noise, vibration, and harshness testing reveals that the noise performance of amorphous magnetic alloy is lower than that of silicon steel sheets.
In recent years, deep learning-based methods for surface defect detection in steel strips have advanced rapidly. Nevertheless, existing approaches still face several challenges in practical applications, such as insufficient dimensionality of feature information, inadequate representation capability for single-modal samples, poor adaptability to few-shot scenarios, and difficulties in cross-domain knowledge transfer. To overcome these limitations, this paper proposes a multi-modal fusion framework based on graph neural networks for few-shot classification and detection of surface defects. The proposed architecture consists of three core components: a multi-modal feature fusion module, a graph neural network module, and a cross-modal transfer learning module. By integrating heterogeneous data modalities—including visual images and textual descriptions—the method facilitates the construction of a more efficient and accurate defect classification and detection model. Experimental evaluations on steel strip surface defect datasets confirm the robustness and effectiveness of the proposed method under small-sample conditions. The results demonstrate that our approach provides a novel and reliable solution for automated quality inspection of surface defects in the steel industry.
High-speed permanent magnet machines frequently employ axially constrained solid rotors. These rotors undergo complex failure due to the combined action of centrifugal loading and interference-fit contact pressure. Existing analytical models often overlook this interaction, which can lead to overestimated reliability. To address this limitation, a three-dimensional axisymmetric elastic–static model is developed. This model quantifies how rotational speed and interference fit jointly govern failure behaviour. A systematic computational framework is established to evaluate three primary failure modes: interface debonding, permanent magnet fracture, and retaining sleeve yielding. The framework explicitly accounts for axial constraint effects. Finite element simulations and prototype testing on a 3 kW, 200,000 r/min motor validate the model, confirming its accuracy in predicting failure limits. The stress distributions and dynamic responses under axial constraint are systematically analysed and compared with numerical and experimental results. Consequently, the proposed approach provides a reliable foundation for designing high-speed rotors under axial constraints.
Hybrid stepper (HB) motors are widely used in precision actuation systems such as cryogenic refrigerator robotic arms. Under cryogenic working conditions, the core loss characteristics of magnetic materials change significantly, while conventional core loss models calibrated at room temperature can hardly provide reliable prediction accuracy. In this work, the electromagnetic properties of 35SW1900 non-oriented silicon steel were measured from 25 °C − 100 °C using a BROCKHAUS Epstein frame system. Variations in permeability, core loss and coercivity with magnetic flux density, temperature and frequency were obtained. An improved core loss model was developed by introducing a flux-dependent exponent and dual temperature correction coefficients for hysteresis and eddy current losses. Experiments place the prediction error of the proposed model within 4% under cryogenic conditions. Compared with the classical Bertotti model, the proposed model effectively reduces high-frequency deviation caused by the temperature-dependent material properties and skin effect. The core loss of silicon steel increases by 15–30% at −100 °C compared with room temperature, which is mainly attributed to the decrease in resistivity and the strengthening of domain wall pinning. This paper provides an accurate loss prediction method and design references for HB motors applied in ultralow temperature working conditions.