In the globe, there is a rise in water demand for agricultural, industrial, and domestic purposes. Single-basin solar stills (SBSS) have been a subject of research in various countries, particularly in regions with water scarcity or limited access to clean drinking water. In this work, SBSS for desalinating high-salinity water were developed, tested, and evaluated based on a developed numerical model using MATLAB R2021a program to predict the best productivity through the best selection of raw materials used to develop the SBSS. A four-inclined SBSS was fabricated and examined experimentally according to numerical model findings for best design parameters at Marsa Matrouh, 31° 21′ 10.44″N, 27°14′14.10″ E, Agricultural Station—Agricultural Research Center (ARC), Egypt. The hourly experimental results are compared with the numerical results. A good correlation between the numerical and the experimental results with variations in water, and glass temperatures of 9, and 18% respectively, and a variation in cumulative productivity by 11%. The results clearly showed that instantaneous productivity increases by decreasing water depth to 10 mm and using the SBSS unit partially insulated from the bottom of the basin. Adding insulation in front of the sides and back of tempered glass increases the shading area and decreases water temperature hence the cumulative productivity by 15%. The cumulative productivity reached 3 L for the SBSS unit partially insulated from the bottom of the basin with an area of 0.6 m2 for only 12 h working system at a water depth of 10 mm.
The mechanization of wheat harvesting in Egypt is a critical step towards enhancing food security. This study evaluated the operational performance, grain loss, and economic viability of four wheat harvesting systems for the ‘Sakha 95’ variety in the Nile Delta. To evaluate and rank the different systems based on multiple criteria, the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) was employed. A Randomized Complete Block Design (RCBD) with three replicates was used to test three self-propelled combine harvesters (Claas [4.2 m], Field-King [2.0 m], Daedong [1.4 m]) alongside one semi-mechanized system (reaper–binder + stationary thresher). The TOPSIS analysis identified the Field King combine as the most recommended system (Rank 1), providing the optimal balance between operational efficiency and cost. It achieved the lowest direct harvesting cost (3386.66 EGP ha−1) with a minimal grain loss of only 0.05%. The Claas combine secured Rank 2. While it reached the highest effective field capacity (1.18 ha h−1) and near-total grain recovery (0.005% loss), its ranking was influenced by its high initial purchase price and fuel consumption. The reaper–binder system (Rank 3) and Daedong combine (Rank 4) followed. Despite having the highest operational cost (7371.42 EGP ha−1) and higher grain losses (0.72%), the reaper–binder remains a scientifically justified choice for integrated crop-livestock systems, as its ability to produce ready-to-use “soft straw” provides a net economic advantage for smallholders. The study concludes that while large combines are ideal for the “New Lands,” mid-sized units like the Field King are best suited for scaling through cooperatives in fragmented landscapes.