Accumulation of salts in irrigated soils can be detrimental not only to growing crops but also to groundwater quality. Soil salinity should be monitored reg-ularly and appropriate irrigation with the required leaching rate should be applied to avoid excessive salt accumulation in the root zone, thereby im-proving soil fertility and crop production. We combined two frequency domain electromagnetic induction (FD-EMI) mono-channel sensors (EM31 and EM38) and operated them at different heights and with different coil orientations to monitor the vertical distribution of soil salinity in a salt-affected irrigated area in Kairouan (central Tunisia). Multiple measurement heights and coil orientations were used to enhance depth sensitivity and thereby improve salinity predictions from this type of proximal sensors. The resulting mul-ti-configuration FD-EMI datasets were used to derive soil salinity information using inverse modeling based on a recently developed in-house laterally constrained inversion (LCI) approach. The collected apparent electrical con-ductivity (ECa) data were inverted to predict the spatial and temporal distri-bution of soil salinity. The results highlight several findings about the distri-bution of salinity in relation to different irrigation systems using brackish water, both in the short and long term. The expected transfer of salinity from the surface to deeper layers was systematically observed by our FD-EMI surveys. However, the intensity and spatial distribution of soil salinity varied between different crops, depending on the frequency and amount of drip or sprinkler irrigation. Furthermore, our results show that the vertical transfer of salinity is also influenced by the wet or dry season. The study provides in-sights into the effectiveness of combining two different FD-EMI sensors EM31 and EM38 for the monitoring of soil salinity in agricultural areas, contributing to the sustainability of irrigated agricultural production. The inversion ap-proach provides a more detailed representation of the of soil salinity distri-bution over spatial and temporal scales across different depths and irrigation systems compared to the classical method based on soil samples and labora-tory analysis which is a point-scale measurement. It provides a more extensive assessment of soil conditions at depths up to 4 m with different irrigation systems. For example, the influence of local drip irrigation was imaged and the history of a non-irrigated plot was evaluated, confirming the potential of this method.
The intensification of irrigation practices often leads to groundwater overexploitation, resulting in soil salinization in the short term and promoting deeper aquifer salinization in the long term. We consider a case study from Kairouan, central Tunisia, a region characterized by a semi-arid climate and severe water scarcity, to assess soil salinity dynamics under irrigated agriculture.Soil salinity was monitored by combining two mono-channel frequency domain electromagnetic induction (EMI) sensors (EM31 and EM38) and operating them at different heights and orientations along profiles of 50 m length. The resulting multi-configuration FD-EMI profiles were inverted using pseudo-2D inversion approach based on laterally constrained 1D inversion (1D LCI).The results reveal clear patterns about salinity distribution associated with different irrigation practices using brackish water, both in the short and long term. A systematic transfer of salinity from surface layers to greater depths was observed. However, salinity levels varied among crops, depending on irrigation frequency, applied water volumes and irrigation type (drip versus sprinkler). Seasonal conditions (wet versus dry periods) also show a strong control on salt redistribution.This study demonstrates that the combined use of two EMI sensors provides an efficient and non-invasive tool for monitoring soil salinity in irrigated agricultural areas. Moreover, the inverse modeling of the EMI data enables a more accurate and quantitative assessment of soil salinity dynamics at different depths under contrasting irrigation systems. Keywords: Soil salinity, hydrogeophysics, electromagnetic induction, inverse modeling.
Accumulation of salts in irrigated soils can be detrimental not only to growing crops but also to groundwater quality. Soil salinity should be regularly monitored, and appropriate irrigation at the required leaching rate should be applied to prevent excessive salt accumulation in the root zone, thereby improving soil fertility and crop production. We combined two frequency domain electromagnetic induction (FD-EMI) mono-channel sensors (EM31 and EM38) and operated them at different heights and with different coil orientations to monitor the vertical distribution of soil salinity in a salt-affected irrigated area in Kairouan (central Tunisia). Multiple measurement heights and coil orientations were used to enhance depth sensitivity and thereby improve salinity predictions from this type of proximal sensor. The resulting multi-configuration FD-EMI datasets were used to derive soil salinity information via inverse modeling with a recently developed in-house laterally constrained inversion (LCI) approach. The collected apparent electrical conductivity (ECa) data were inverted to predict the spatial and temporal distribution of soil salinity. The results highlight several findings about the distribution of salinity in relation to different irrigation systems using brackish water, both in the short and long term. The expected transfer of salinity from the surface to deeper layers was systematically observed by our FD-EMI surveys. However, the intensity and spatial distribution of soil salinity varied between different crops, depending on the frequency and amount of drip or sprinkler irrigation. Furthermore, our results show that vertical salinity transfer is also influenced by the wet or dry season. The study provides insights into the effectiveness of combining two different FD-EMI sensors, EM31 and EM38, for monitoring soil salinity in agricultural areas, thereby contributing to the sustainability of irrigated agricultural production. The inversion approach provides a more detailed representation of soil salinity distribution across spatial and temporal scales at different depths, and across irrigation systems, compared to the classical method based on soil samples and laboratory analysis, which is a point-scale measurement. It provides a more extensive assessment of soil conditions at depths up to 4 m with different irrigation systems. For example, the influence of local drip irrigation was imaged, and the history of a non-irrigated plot was evaluated, confirming the potential of this method.