The development of safety and quality standards for equestrian surfaces needs to be based on objective, repeatable measurements which allow comparisons between surfaces. These measurements should incorporate the assessment of surface performance by riders. This study provides data from objective and subjective assessment of functional properties of high-level show jumping competition and warm-up arenas. Twenty-five arenas in nine international show jumping events were evaluated by mechanical in-situ testing with a surface tester, rider assessments using visual analogue scales (198 riders provided 749 arena evaluations), descriptions of arena constructions and by laboratory tests of surface material. Mixed models were used to present subjective evaluation of rider perception of the functional properties for each arena while controlling for rider and event. The association between objective and subjective assessments were also explored creating mixed models, controlling for rider and event. Mechanical measurements of impact firmness, and to a lesser extent cushioning and grip, had a significant positive association with the riders' perception. Responsiveness as assessed by the Orono biomechanical surface tester (OBST) was negatively associated with the riders' perceptions, which suggests riders and the OBST had different concepts of this functional property and that further developments of the OBST might be necessary. Objectively measured uniformity showed no useful association with riders' perception. Even though arena assessments were made by top level riders, a substantial inter-rider variation was demonstrated.

Mechanical properties of sports surfaces have previously been shown to be influenced by surface drainage, moisture content and compaction but these factors have not yet been quantified for equestrian surfaces. The aim of the study was to examine the effect of three moisture levels (11.96 ± 1.63%, 17.31 ± 1.14%, 19.08 ± 0.78%) and three rates of compaction (1.647±0.02 g/cm³, 1.748±0.046 g/cm³, 1.766±0.039 g/cm³) on the functional properties of a synthetic equestrian surface constructed over two distinct drainage profiles. The surfaces with a high (19.08%) moisture content and medium density when laid on permavoid™ had the most favourable results when taking into account all of the measured parameters with regards to reducing the risk of injury yet potentially offering sufficient support to the horse for efficient locomotion.

Providing the neonatal calf with a sufficient quantity and quality of colostrum may optimise future health, performance and reduce the risk of morbidity. A 6-month double blind trial with 80 prepartum dairy cows was conducted to determine if supplementation with mannan oligosaccharide (MOS) influences colostrum quality, quantity and subsequent calf performance. The Holstein cross Friesian 80 cows (no heifers) were allocated into a control and treatment group at the point of drying off by previous lactation number and yield. The control and treatment group were fed the same commercial standard dry cow diet throughout the trial supplemented with a mineral concentrate without or with 1.33% MOS, respectively. Cows were milked out of colostrum within 40 min of calving prior to calf suckling, weight was recorded. Mannan oligosaccharide fed cows produced significantly more colostrum on first milking (7.5 kg, SEM±0.69) compared with cows fed without MOS (5.6 kg, SEM±0.43). The immunoglobulin G (IgG) concentrations (control 53.7 IgG g/l, SEM±5.8 and MOS of 42.7 IgG g/l, SEM±4.9) and total mass of IgG did not differ between treatments. No significant observable MOS-derived effect on calf health or weight gain occurred during the study.

There is limited information about spatial variation of equestrian arena surfaces despite unequivocal evidence to suggest that lack of uniformity increases risk of injury. Spatial differences in the functional properties of an arena are likely to be due to a number of intrinsic and extrinsic characteristics including variation in the physical properties of the surface. The aim of this work was to examine spatial variation of peak load (cushioning) across an arena surface and investigate the influence that physical properties had on these variations using Principal Component Analysis. Sampling (n=61) of a 20 m by 65 m indoor synthetic equestrian arena surface occurred in one day using an Orono biomechanical surface tester (OBST). The OBST was used at every location to measure peak load (dropped twice on the same point). A 200g sample of the surface was taken from the point of impact (at every location) and the physical properties were assessed in the laboratory. Samples were oven dried at 45°C for 24hours in order to measure moisture content and percentage binder was quantified using Soxhlet extraction. Sand particle size distribution were determined using sieving and sedimentation methods and percentage organic matter was achieved by burning off organic material using a muffle furnace at 440°C. The surface was characterized by three principal components (PC1, PC2 and PC3). Peak load and moisture were the first principal components that accounted for 41% of surface variation. Percentage organic matter and percentage binder were identified as PC2 (20%) and PC3 (18%) respectively. This highlights their respective importance in surface variation. There was a moderate negative correlation between moisture and peak load (rs = 54%; P<0.0001) however cluster analysis revealed that peak load and moisture were grouped into five areas of similarity that corresponded to sample location, reinforced using an ANOVA (P<0.0001). The findings demonstrate an effective method of assessing uniformity and additionally, identify physical factors relevant to the load carrying capacity of this specific surface. Uneven surfaces can influence horse and rider safety therefore recognizing appropriate techniques to monitor spatial variation and implement relevant maintenance, is of key importance to equestrian athletes