An experimental investigation of Ag and Ni nanoparticles (NPs) deposited on Silicon with its native oxide, on highly oriented pyrolytic graphite and on graphene flakes is reported. The NPs were physically synthesized with a magnetron based gas aggregation source and the produced beam was mass-filtered and deposited in vacuum on the substrates. The study was concentrated on the morphology for the different cases, shedding some light on the interaction of pre-formed NPs with surfaces, a crucial aspect both of technological and scientific relevance. The nature of adhesion can be strongly influenced by the intrinsic properties of the surface (like for instance the energetics of interaction between the NP surface atoms and the first layers of the substrate) and/or the extrinsic properties, like the presence of defects, step edges, impurities and other irregularities. After adhesion, the NPs mobility and their mutual interaction are very relevant. In this work, the study was concentrated on NP/surface morphology, by using atomic force microscopy, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. Article highlights: Morphology of physically synthesized metal Nano-Particles (NPs) on Si, HOPG and Graphene was investigated. The NPs were pure Ag and Ni. Coalescence, diffusion and self-aggregation and preferential adhesion were observed, with possible applications in sensor technology. Possible explanations are: NP softness, NP/surface bonding interaction and presence of contaminant species molecules between NP.
The transition from mechanical to physiological ventilation is a delicate step during the recovery from ECMO, in particular following severe respiratory failures. Since there is controversy on the optimal degree of mechanical ventilation support, the maintenance of physiological ventilation can be crucial to determine the balance between lung rest and lung recovery. We believe that the development of closed-loop control systems for mechanical ventilation, designed to maintain or restore physiological respiratory activity in patients supported by extracorporeal membrane oxygenation (ECMO) could contribute to achieve this goal. In our vision, the core of such a system could be a biologically inspired computational model of the respiratory neural control center, capable of simulating the respiratory rhythm required to efficiently eliminate CO₂ from the body. The outputs of the modeled respiratory rhythm (e.g., rate and pattern) would represent the patient’s needs that should be ideally maintained to ensure proper CO₂ clearance. The use of a simulated respiratory rhythm to dynamically control a mechanical ventilator integrated with ECMO would ensure that ventilatory support is adjusted in real time to meet the physiological demands indicated by inputs delivered by external sensors. One of the key advantages of this system would be its use during weaning from ECMO. By simulating a target respiratory rhythm and gradually transferring the workload from ECMO to mechanical ventilation, the system could allow for a smoother and safer transition to spontaneous or assisted breathing.
The human respiratory Central Pattern Generator (CPG) is a complex and tightly regulated network of neurons responsible for the automatic rhythm of breathing. Among the brain nuclei involved in respiratory control, excitatory neurons within the PreBotzinger Complex (PreBötC) are both necessary and sufficient for generating this rhythmic activity. Although several models of the PreBötC circuit have been proposed, a comprehensive analysis of network behavior in response to physiologically relevant external inputs remains limited. In this study, we present a computational model of the PreBötC consisting of 1000 excitatory neurons, divided into two functional subgroups: the rhythm-generating population and the pattern-forming population. To enable real-time closed-loop simulations, we employed parallelized multi-process computing to accelerate network simulation. The network, composed of asynchronous neurons, could produce bursting activity at a eupneic breathing frequency of 0.22 Hz, which could also reproduce the rapid and stable chemoreception of breathing activated in response to hypercapnia. Additionally, it successfully replicated rapid and stable respiratory responses to elevated carbon dioxide levels (hypercapnia), mediated through simulated chemoreception. External inputs from a carbon dioxide sensor were used to modulate the network activity, allowing the implementation of a real-time respiratory control system. These results demonstrate that a network of asynchronous, non-bursting neurons can emulate the behavior of the respiratory CPG and its modulation by external stimuli. The proposed model represents a step toward developing a closed-loop controller for breathing regulation.