Wavelet‐based de‐noising is used to separate partial discharge (PD) signals from the noises resulting from measurement circuits or the surrounding environment. PD de‐noising by using the wavelet shrinkage method is capable of separating the noise component to some extent, but the selection of the wavelet base has a remarkable effect on the de‐noising results. The wavelet base is directly related to the distortion of the PD waveform and quality of the de‐noising process. Although there are applications on PD noise separation in the literature, the selection of the wavelet base, which affects the evaluation of the PD characteristics, is still challenging. Instead of using correlation‐based wavelet base selection for de‐noising PD data, in this study a novel wavelet base selection method based on the most informative sub‐band energy and entropy for separating noise from PD pulses is introduced and successfully applied to raw data obtained from the PD measurement set‐up. The advantage of the proposed method is that the wavelet base selection solution is automatic and independent of the original noise‐free pulse waveform. This study shows that the proposed method is useful for the extraction of noisy PD pulses by describing the basic discharge parameters such as discharge amplitude and the duration and time of occurrence more clearly.
This study aimed to develop an industrially scalable coating route for enhancing the oxidation resistance of carbon fiber fabrics, a critical requirement for next-generation aerospace and high-temperature composite structures. To achieve this goal, synthesis of hexagonal boron nitride (h-BN) layers was achieved via a single wet step in which the fabric was impregnated with an ammonia–borane/THF solution and subsequently nitrided for 2 h at 1000–1500 °C in flowing nitrogen. Thermogravimetric analysis coupled with X-ray diffraction revealed that amorphous BN formed below ≈1200 °C and crystallized completely into (002)-textured h-BN (with lattice parameters a ≈ 2.50 Å and c ≈ 6.7 Å) once the dwell temperature reached ≥1300 °C. Complementary XPS, FTIR and Raman spectroscopy confirmed a near-stoichiometric B:N ≈ 1:1 composition and the elimination of O–H/N–H residues as crystallinity improved. Low-magnification SEM (100×) confirmed the uniform and large-area coverage of the BN layer on the carbon fiber tows, while high-magnification SEM revealed a progressive densification of the coating from discrete nanospheres to a continuous nanosheet barrier on the fibers. Oxidation tests in flowing air shifted the onset of mass loss from 685 °C for uncoated fibers to 828 °C for the coating produced at 1400 °C; concurrently, the peak oxidation rate moved ≈200 °C higher and declined by ~40%. Treatment at 1500 °C conferred no additional benefit, indicating that 1400 °C provides the optimal balance between full crystallinity and limited grain coarsening. The resulting dense h-BN film, aided by an in situ self-healing B2O3 glaze above ~800 °C, delayed carbon fiber oxidation by ≈140 °C. Overall, the process offers a cost-effective, large-area alternative to vapor-phase deposition techniques, positioning BN-coated carbon fiber fabrics for robust service in extreme oxidative environments.
4 June 2024 in AURUM Journal of Engineering Systems and Architecture
In this study, the damage caused by the lightning direct effect on carbon fiber reinforced polymer (CFRP) aircraft structures located in the initial lightning strike zones has been addressed. Lightning current component A was applied to both CFRP and copper foil coated CFRP models, and coupled electrical-thermal analyses were conducted using the finite element method implemented in the Abaqus software. The analysis aimed to investigate the effectiveness of 448 g/m² solid copper foil in reducing the damage caused by Joule heating, one of the direct effects of lightning, in CFRP, as well as to determine the influence of panel size variation on the extent of damage.
12 April 2023 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Bu çalışmada, hava araçlarında kullanılan yüksek gerilimli güç kablolarının döşeme koşullarının belirlenmesi amacıyla akım taşıma kapasitelerini etkileyen baskın etkenlerden olan ısıl davranışı sonlu elemanlar yöntemi ile incelenmiştir. Bu amaçla kablonun ve döşendiği ortamın sıcaklığı ile akım taşıma kapasitesi arasındaki ilişkiyi gözlemlemek için elektrik-ısıl çoklu fiziksel analiz modeli oluşturulmuştur. Analizlerde SAE AS22759/1 standartına uygun bir damarlı, 2 AWG (39,19 mm2) kesitli kablolar göz önüne alınmıştır. Çalışma kapsamında hem ortam sıcaklığının hem de kablolar arası uzaklığın kablonun akım taşıma kapasitesine etkisi incelenmiştir. Yapılan analizler sonucunda, kablolar arasındaki uzaklığın azalmasının kablonun akım taşıma kapasitesinin azalmasına; ortam sıcaklığının azalmasının da kablonun akım taşıma kapasitesinin artmasına neden olduğu görülmüştür.
13 January 2026 in PHM Society Asia-Pacific Conference
Vibration-Based Structural Health Monitoring (SHM) systems offer significant potential for damage detection due to their non-destructive nature and real-time capabilities, while reducing maintenance costs for aerospace and automotive applications. This study investigates the effect of damage on the modal parameters of a Carbon Fiber Reinforced Polymer (CFRP) fixed-free beam, with the goal of identifying damage location and severity. The lamina material properties of the CFRP were evaluated using composite lamination theory (CLT). By altering the location and depth of the damage, numerical analyses were conducted on the CFRP beam, and discrepancies between the intact and damaged models were examined. Modal frequency shifts were quantified using Relative Natural Frequency Change (RNFC), and RNFC-based mapping surfaces dependent on damage location and severity were generated for first four transverse vibrational modes of the beam. The model was validated through experiments on the intact and damaged CFRP specimens. The beam was excited with an impact hammer near the fixed-end, and responses were collected by piezoelectric sensors placed along the beam and laser vibrometer focused on the free end of the beam. The modal parameters were extracted using Ho-Kalman’s subspace method and experimental RNFC results of damaged samples were calculated. Then Nearest Neighbor search algorithm was successfully employed to estimate the damage location and severity by comparing experimental results to generated RNFC-based mapping surfaces.
Sandwich composite floor panels are widely used in aircraft interior structures because of their lightweight and high stiffness-to-weight characteristics. However, the guided-wave response of such panels is strongly influenced by their multilayer configuration, honeycomb core, attenuation behavior, sensor-path geometry, and excitation frequency. In this study, an active guided-wave-based Structural Health Monitoring (SHM) configuration was experimentally evaluated on an aerospace-type sandwich composite floor panel using a piezoelectric (PZT) sensor network. The specimen consisted of glass fiber reinforced polyetherimide (GFR-PEI) face sheets and a phenolic-coated aramid honeycomb core. Controlled bonded patch-induced surface perturbations were sequentially applied over 25 predefined panel regions to introduce repeatable local mass-loading and damping changes. Guided-wave measurements were performed using an Acellent ScanGenie system over a frequency range of 75–600 kHz with 25 kHz increments and twelve directed actuator–receiver paths. The results showed that the measured Damage Index (DI) response depends strongly on excitation frequency, sensing path, and perturbation location. The 400–450 kHz range produced relatively higher DI values under the tested configuration, and 425 kHz yielded the highest mean DI among valid measurements. However, the valid sensing coverage at 425 kHz was only 50%; therefore, this frequency was not interpreted as the most robust overall monitoring frequency. Lower frequencies around 100–150 kHz provided full sensing coverage while maintaining relatively high DI values. Frequencies above 550 kHz showed reduced measurement reliability due to increased attenuation and poor usable signal response. Overall, the study provides a comparative sensitivity assessment of a guided-wave-based PZT network on a sandwich composite floor panel under controlled bonded patch-induced perturbations, rather than a direct validation of realistic internal sandwich-panel damage mechanisms.