The combination of microplasma generation and optical multi-material fiber technologies enables real-time diagnostics. The stack-and-draw technique has emerged as a promising method for creating multimaterial fibers suitable for plasma-based diagnostics. The elaboration of such devices for the generation of long-lasting microplasma for real-time and remote analyses remains challenging due to the difficulties of reaching long lengths without defects and with continuous electrodes. Post-functionalization of the electrode surface is also required to increase the plasma emission duration. In this study, glass was preferred over polymers for producing rectangular fibers (ribbons) that are easy to stack without wasting space and are resistant to high operating temperatures. Conversely, an aluminum alloy was chosen for the electrodes to reduce discontinuity defects. With the chosen bi-electrode geometry, the cooling rate during drawing has to remain between 200 and 300 °C/s to limit defect formation and guarantee low electrical resistivity. During plasma generation, an in situ oxide layer forms on the tip of each electrode. This results in a significant increase in plasma emission duration without the need for an additional post-functionalization step after drawing. These ribbons were tested in combination with an optical emission spectrometer to create a miniature gas detector for hydrocarbons.