In recent years, biomedical materials have been used in the response to the emergence of medical infections that pose a serious threat to the health and life of patients. The construction of superhydrophobic coatings and antimicrobial coatings is among the most effective strategies to address this type of medical derived infection. Firstly, this paper reviews the preparation methods of superhydrophobic surface coatings and their applications; summarizes the advantages and disadvantages of superhydrophobic surface preparation schemes based on the template method, spraying methods, etching methods, and their respective improvement measures; and focuses on the applications of superhydrophobic surfaces in self-cleaning and antibacterial coatings. Then, the action mechanisms of contact antibacterial coatings, anti-adhesion bacteriostatic coatings, anti-adhesion bactericidal coatings, and intelligent antibacterial coatings are introduced, and their respective characteristics, advantages, and disadvantages are summarized. The application potential of antimicrobial coatings in the field of biomedical materials is highlighted. Finally, the applications of superhydrophobic and antimicrobial coatings in medical devices are discussed in detail, the reasons for their current difficulties in commercial application are analyzed, and the future directions of superhydrophobic coatings and antimicrobial coatings are considered.

Liquid crystal display (LCD) is a display device based on liquid crystal electro-optic effect, and LCDs have gradually appeared and have become an indispensable part of people’s lives. In the development of LCD technology, the detection of Mura defects is a key concern in the manufacturing process. The Mura defect is a kind of display defect with low contrast and an irregular shape. This study first explains the mechanism of Mura defects in the LCD manufacturing process and classifies typical Mura defects. Then, three main purposes for the defect detection of LCDs are compared, and the advantages and disadvantages are conducted. Following that, this research examines reviews the linked literature on image preprocessing, feature extraction, dimension reduction, and classifiers of Mura defects. Finally, the future development trend and research direction of Mura defect detection based on machine vision can be drawn by this study.

This paper reviews the manufacturing process of ultra-thin heat pipes and the latest process technologies in detail, focusing on the progress of the shape, structure, and heat transfer mechanism of the wick. The effects of the filling rate and tilt angle on the heat transfer performance of the ultra-thin heat pipe, as well as the material selection of ultra-thin heat pipes, is sorted out, and the surface modification technology is analyzed. Besides, the optimal design based on heat pipes is discussed. Spiral woven mesh wick and multi-size composite wick have significant advantages in the field of ultra-thin heat pipe heat transfer, and comprehensive surface modification technology has huge potential. Finally, an outlook on future scientific research in the field of ultra-thin heat pipes is proposed.

The present study aims to elaborate particle in-flight behavior during plasma spraying and its significance in determining the microstructure and mechanical properties of plasma sprayed yttria partially stabilized zirconia (YSZ) thermal barrier coatings (TBCs). The as-sprayed YSZ coatings were characterized in terms of defects (such as pores, unmelted particles and cracks) and fracture toughness. The results showed that, due to the higher temperature and velocity of in-flight particles in a supersonic atmospheric plasma spraying (SAPS) compared to that of atmospheric plasma spraying (APS), denser coatings were formed leading to a better fracture toughness. The percentage of defects of the microstructure was similar to the temperature and velocity of particles in-flight during plasma spraying. Furthermore, the structural defects had a strong effect on its mechanical behavior. The total defect percentage and fracture toughness in SAPS-TBCs spanned 6.9 ± 0.17%–13.26 ± 0.22% and 2.52 ± 0.06 MPa m^1/2–1.78 ± 0.19 MPa m^1/2; and 11.11 ± 0.36%–17.15 ± 0.67% and 2.13 ± 0.08 MPa m^1/2–1.4 ± 0.12 MPa m^1/2 in APS-TBCs.