Thermal spray coating, exceptionally high-velocity oxyfuel (HVOF), improves the corrosion resistance and wear of metal. Coating parameters play a vital role in the properties of the coating. The quality of coating can be increased by selecting appropriate coating parameters. In the case of HVOF, the oxygen flow rate and spray distance are the most significant parameters that directly influence the porosity and corrosion resistance of the coating. Porosity is essential in thermal barrier coatings for low thermal conductivity, but there is a limit of porosity beyond which it can cause failure. Hence, understanding the effects of these parameters is essential to evaluate and further minimize the porosity in order to improve the corrosion resistance and durability of the thermal barrier coating. This article reviews hot corrosion in thermal barrier coatings, the stages of corrosion, the importance of spray parameters, and the effect of the oxygen flow rate and spray distance on the corrosion resistance of HVOF-sprayed coatings. Afterwards, the coating materials, the substrate, the flow rate of oxygen, the spray distance, and the fuel used during the HVOF spraying process from recent articles are summarized. In summary, this review compares the flow rate of oxygen and the spray distance with the corrosion capacity of the coating under different corrosive environments and materials to optimize these parameters for high-quality coating, which would sustain under high temperatures for future applications.

Background: Despite extensive research over the decades, cancer therapy is still a great challenge because of the non-specific delivery of chemotherapeutic agents, which could be overcome by limiting the distribution of chemotherapeutic agents toward cancer cells. Objective: To reduce the cytolytic effects against cancer cells, graphene oxide (GO) nanoparticles (NPs) can load anticancer medicines and genetic tools. Methodology: During the current study, folic-acid-conjugated graphene oxide (Fa-GO) hybrid mucoadhesive chitosan (CS)-based hydrogel beads were fabricated through an “ion-gelation process”, which allows for regulated medication release at malignant pH. Results: The fabricated chitosan–alginate (SA-CS) hydrogel beads were examined using surface morphology, optical microscopy, XRD, FTIR, and homogeneity analysis techniques. The size analysis indicated that the size of the Fa-GO was up to 554.2 ± 95.14 nm, whereas the beads were of a micrometer size. The folic acid conjugation was confirmed by NMR. The results showed that the craggy edges of the graphene oxide were successfully encapsulated in a polymeric matrix. The mucoadhesive properties were enhanced with the increase in the CS concentration. The nanohybrid SA-CS beads exhibited good swelling properties, and the drug release was 68.29% at pH 5.6 during a 24 h investigation. The accelerated stability study, according to ICH guidelines, indicated that the hydrogel beads have a shelf-life of more than two years. Conclusions: Based on the achieved results, it can be concluded that this novel gastro-retentive delivery system may be a viable and different way to improve the stomach retention of anticancer agents and enhance their therapeutic effectiveness.