The increasing adoption of lithium-ion (Li-ion) batteries in electric vehicles (EVs) and renewable energy systems has heightened the demand for efficient Battery Thermal Management Systems (BTMS). Effective thermal regulation is critical to prevent performance degradation, extend battery lifespan, and mitigate safety risks such as thermal runaway. Liquid cooling has become the dominant strategy in commercial EVs due to its superior thermal performance over air cooling. However, optimizing liquid cooling systems remains challenging due to the trade-off between heat transfer efficiency and pressure drop. Recent studies have explored various coolant selection, nanofluid enhancements, and complex channel geometries, an ideal balance remains difficult to achieve. While advanced methods such as topology optimization offer promising performance gains, they often introduce significant modeling and manufacturing complexity. In this study, we propose a practical alternative: an interconnected straight-channel cooling plate that introduces lateral passages to disrupt the thermal boundary layer and enhance mixing. Comparative analysis shows that the design improves temperature uniformity and reduces peak battery temperature, all while maintaining a moderate pressure drop. The proposed configuration offers a scalable and effective solution for next-generation BTMS, particularly in EV applications where thermal performance and manufacturability are both critical.
This study presents an optimal design methodology for a piezoelectric-based bladeless wind turbine (BWT) that efficiently converts wind-induced vibration of a cantilever-mounted cylinder into electrical energy. A lumped-parameter model integrating structural dynamics, fluid-structure interaction, and piezoelectric energy conversion is introduced and simplified to derive key dimensionless design parameters and optimal conditions for maximizing power output. The optimal design criteria are as follows: tuning the resonance between the structural natural frequency and vortex shedding frequency; setting the dimensionless load resistance R* to unity; and minimizing ωnRLCeq to a value smaller than unity. Numerical simulations and wind tunnel experiments validate the model, showing good agreement with less than 7% error in power prediction under resonance conditions and successfully predicting the coupled behavior of fluid, structure, and piezoelectric components. The proposed optimal design methodology facilitates the development of compact and efficient piezoelectric-based bladeless wind energy harvesting systems suitable for urban and space-constrained environments.
An asymmetric four-chamber redox flow desalination cell was developed to enhance ion transport and energy efficiency by controlling chamber geometry, applied voltage, and electrolyte flow rate. The design integrates thick outer redox chambers with thin desalination chambers to promote uniform redox reactions and stable mass transfer. The system operated stably for 12 h and achieved a high salt removal rate of approximately 1226 mmol·m−2·h−1 at 1.0 V with low specific energy consumption of about 99.74 kJ·mol−1, demonstrating both durable operation and highly promising desalination performance. Electrochemical impedance analysis further confirmed that increased electrolyte flow reduces charge-transfer and diffusion resistances, enabling faster ionic transport. These findings highlight the originality of the chamber-asymmetric design and its promise for compact, low-voltage redox flow systems. This work provides design guidelines for next-generation flow-based desalination systems and suggests future research directions in scaling the architecture, optimizing flow-channel geometry, and integrating higher-stability redox electrolytes for long-term practical operation.